Discover the world with our lifehacks

What brand ignition coils are best?

What brand ignition coils are best?

Best Ignition Coil Reviews & Recommendations 2020

  • Best Overall. Delphi GN10328 Ignition Coil. Check Latest Price.
  • Best Value. ENA 8-Pack Ignition Coil Set. Check Latest Price.
  • Honorable Mention. King Auto Parts Combo Pack of Ignition Coils for Honda, Acura, Saturn. Check Latest Price.

Are Delphi coils better than Bosch?

I would go with the Delphi option. Used on F80 which has a lot more power from the factory than N54 engines. Btw the oem ones from Bosch also come in a BMW stamped variant. Those are tested to a higher standard and hold up better.

What is the resistance of a Bosch coil?

The Bosch Black Coil (made in North America) has 3.4 Ω primary resistance. Ideal for use with 4- and 6-cylinder Hot Spark ignition kits.

How many ohms should a ignition coil have?

A typical value would read 0.4 – 2 ohms.

Are Bosch ignition coils good for BMW?

What OEM options do I have? If you’re familiar, you would’ve heard about Bosch, Delphi and coils by now. They are the OEMs for BMW ignition coils but, they are not all the same. Bosch was the main manufacturer for BMW’s ignition coils for quite a long time, before Delphi and Eldor came along.

Do high performance ignition coils make a difference?

A high performance ignition coil helps engine performance four important ways. First, the higher voltage allows for a larger spark plug gap, which results in a more robust initial flame kernal at the start of combustion. The result is a real-world engine torque increase.

Is Delphi the same as Bosch?

Bosch is the OEM injector. Delphi is a high quality OEM alternative. Problems with either one? The price difference is about $100.

What should the ohms be on a coil?

You should have a resistance reading of at least 3-4.5 ohms. A bad coil will show a higher reading then 3-4.5. Next, place the red or black lead from the meter to the centre of the coil , and to either one of the terminals positive or negative. You want 9500-10000 Ohms, a little less is ok but no more.

What Ohm ignition coil should I use?

The 3.0-ohm coil should be used on PerTronix Ignitors installed on four- and six-cylinder engines while 1.5-ohm coils should be used for eight-cylinder applications. These coils can be used on virtually any inductive (non-capacitive discharge) ignition system.

How many ohms is a Bosch Blue coil?

3 Ohms
The high-output, genuine Bosch “Blue” coil is perfect for most 12 volt 4 and 6 cylinder applications. This model has 3 Ohms internal resistance, so a ballast resistor is not required.

Why choose Bosch ignition coils?

Properly performing ignition coils can provide increased ignition energy, lower fuel consumption, and reduced exhaust emissions for your vehicle. Bosch ignition coils are built to achieve or exceed OE specifications, and are known industry-wide for their reliability and performance.

What is the difference between a 4465 and 4470 coil?

The 4465 coil’s tab is to the left of center. 4470 tab is in the center. You can also check the website for compatibility. The coil fits in the engine, but the triangular ignition wire plug does not fit into the coil.

Where do I find the 4465 and 4470 spark plugs?

There is a thin plastic tab below the triangular section for the plug that makes them fit specific to those vehicles. I wouldn’t cut or remove that like another reviewer did. The 4465 coil’s tab is to the left of center. 4470 tab is in the center. You can also check the website for compatibility.

What kind of ignition coil does a 2006 BMW 325i use?

For 2006 Bimmers (325, 330, 525, 530, Z4), Amazon might show that the part fits but notice there is fine print underneath saying “From 04/2006”. Look inside your front driver side door for the BMW sticker to find your manufacture date. Based on 325xi, cars built through 03/2006 will use 0221504465 Bosch ignition coil.