What are the steps in sewing pillowcase?
How to Make a Simple Pillow Case
- Step 1: Make a “Pattern” Using a pillowcase you already have, measure the rectangle to find how big you need to make yours.
- Step 2: Cut Fabric.
- Step 3: Pin the Fabric.
- Step 4: Sew.
- Step 5: Make the Opening Hem.
- Step 6: Pin the Panels Together.
- Step 7: Sew Around the Panels.
- Step 8: Done.
How much fabric do I need for a burrito pillowcase?
For the standard size pillowcase, start by cutting out a rectangular piece 27″ x 43″ big, from the main fabric. Cut out the cuff fabric into a piece that’s measuring 11 x 43 inches. For the queen size pillowcase, cut out the main fabric into a piece measuring 31″ x 43″ in dimensions.
What are the 5 steps of drafting a pattern for pillowcase?
How to Make a Simple Pillow Case
- Step 1: Materials. Fabric.
- Step 2: Make Pattern. Using an old pillowcase as a guide, measure out the amount of fabric that you’ll need, making sure to leave an extra 1 inch around the edges for the seams.
- Step 3: Stitch Seams.
- Step 4: Get Sewing.
- Step 5: You’re Done!
How much fabric do I need to make 2 pillowcases?
To make 2 pillowcases, you need:
- 2 yards (1.9 meters) of fabric for standard & queen size pillowcases (20″ x 30″).
- 2.5 yards (2.3 meters) of fabric for king size pillowcases (20″ x 40″).
What is the sixth step procedure in making throw pillowcase?
- Step 1: Cut Fabric. You can use anything, and I mean ANYTHING.
- Step 2: Trim! (optional)
- Step 3: Pin Your Seams! WITH Trim: ( LESS EASY)
- Step 4: SEW. Sew the edges of your pillow.
- Step 5: Stuff Your Pillow! Take all your pins out.
- Step 6: Finish Sewing.
- Step 7: THROW!
What are the measurements for a burrito pillowcase?
Burrito Pillowcase
- ¾ yard main pillowcase fabric (27” x width of fabric from selvage to selvage)
- ¼ yard cuff fabric (9” x width of fabric from selvage to selvage)
- Accent strip fabric (2” x width of fabric from selvage to selvage), pressed in half lengthwise to make a 1” folded strip.
How much bigger should a pillowcase be than the pillow?
Opt for a pillowcase measuring 1/2 to 1 inch longer than the pillow length and 2 1/2 to 4 inches wider than the pillow width, if you’re buying a ready-made pillowcase.
What is the best fabric to make pillowcases?
Here are the best pillowcase materials:
- Cotton. One of the most popular pillowcase materials is cotton.
- Nylon. Another common pillowcase fabric, nylon is typically made to look like silk.
- Linen. Linen is a high quality, natural flax product that is no longer produced in quantity.
- Satin.
- Silk.
How to make a burrito pillowcase?
Instructions 1 Layer Your Materials. Place your cuff fabric on your work station, right side up. Layer the main pillowcase fabric on… 2 Roll Up the Main Fabric. Stop when you get to the center of the cuff fabric. 3 Fold Up the Cuff Fabric. Bring the bottom edge of the cuff fabric up and over the burrito. Align the raw edges. Pin… More
How do you fold a pillowcase to make a quilt?
Trim the pillowcase to 28” long, measuring from the top of the cuff to the opposite end. Then, fold the pillowcase in half, right sides together. Finger press any wrinkles out, and align the accent strip so each half is laying on top of the other.
How do I install the pillowcase body?
Place the Pillowcase Body on top of the Cuff/Trim with right sides together and pin. Starting at the bottom of the Pillowcase Body, begin rolling the fabric towards the top edge.
How do you finish a pillowcase with Serger?
Finish the Pillowcase There are a few ways you can finish this pillow case: Serger: Fold the pillowcase in half, then serge the raw edges on the top and right sides only. Turn right side out and press. French Seams: Fold the pillowcase in half, wrong sides together (right sides should be facing out).