Why is my chainsaw gas cap leaking?
If the gas cap is still leaking after replacing the gas cap, your problem is probably being caused by a warped or broken fuel tank. Fuel tanks can get warped if they are overheated or come into contact with hot materials. You will likely need to replace the fuel tank unit if it continues to leak.
What size gas line does a Poulan chainsaw take?
Poulan Pro Fuel Line Kit No. Comes with a large 3/16″ OD by 3/32″ ID 2 feet long, small 9/64″ OD by 5/64″ ID 2 feet long. Also comes with the fuel line fitting connector.
Why won’t my Poulan chainsaw keep running?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
What kind of gas goes in a Poulan chainsaw?
regular unleaded gasoline
A: Our units run on 87 octane regular unleaded gasoline. You can use gasoline which is blended with a maximum 10% alcohol. Never use E85 or diesel fuels. Remember to use fresh gasoline and to mix it with the recommended 2-cycle oil.
What does Stihl tank vent do?
The tank vent cap sits on top of the fuel tank and allows these heated gasses to escape.
Who makes Poulan chainsaw?
Husqvarna
Poulan brand today The Poulan brand name is used primarily for outdoor power equipment, such as chainsaws, lawn mowers, and leaf blowers, aimed at the mid-level consumer market. Since Poulan is owned by Husqvarna, the two brands often share technologies.
Why does my Poulan chainsaw only run on choke?
When your chainsaw only runs if the choke is on the problem, in most cases, is a result of fuel supply problems or a faulty carburetor. To fix the problem you should check and clean the fuel system and carburator.
What is the T screw on a chainsaw?
The T screw regulates how much fuel is sent to the carburettor while idling until the throttle is pressed. L Screw – With the chainsaw still running, take a screwdriver and turn the L screw clockwise. Keep turning it until the engine almost stops turning.
Are Poulan chainsaws 2 stroke?
Poulan PL3314 14-in 33-cc 2-Cycle Gas Chainsaw.
How do you check a fuel tank vent?
How Do You Check Your Fuel Tank Vent?
- Take the canister vent line off the gas tank and blow through it.
- You can use compressed air to check it out.
- Try putting wire or plastic tubing through the vent to see if there are blockages.
- You will need to now drain the tank and let the inside air out.