What pressure should I set my HVLP spray gun at?
We recommend painting between 25-30 psi while the trigger is pulled. You may see some paint tech sheets which refer to a painting air pressure of 8-10. Don’t set the spray gun to those as this measurement is referring to the air cap pressure right where the paint comes out.
What psi should I spray paint at?
The working range is between 15 and 50 psi, with smaller patterns requiring lower pressure. No two sprayers are likely to agree on the same settings, so it’s a matter of personal feel. Some typical settings: 15 to 20 psi:Airbrushing, touch-up, shading, sunbursting, and thin finish materials.
What psi should I spray base coat?
When spraying base coat you want to spray at about 26-29 PSI. They way you read this is at your gun, trigger pulled air flowing through and your dial reading 26 psi. When spraying clear coat I like to up the pressure 2-3 psi for a little more atomization and better flow out.
What PSI should I spray base coat?
When spraying base coat clear coat systems, you want to spray at 26-29 PSI. You measure this PSI by pulling the trigger and letting air flow through the tip of your gun with your dial or digital readout saying 26-29 PSI.
What is the best pressure for spray painting?
between 25-30 PSI
What is the best air pressure for spray painting? Again, it’s essential you check your specific model’s recommendations, but your HVLP spray gun PSI will likely sit between 25-30 PSI for something like using an air compressor for spraying cars, rising to 40 PSI in some cases where higher atomisation is needed.
What PSI should my paint gun be at?
Why is my HVLP spray gun spitting?
“Spitting” happens when your paint gun’s nozzle is not properly screwed into place. If your paint gun is spitting or dripping paint, it is probably because the nozzle is not screwed on tightly. If you’ve checked your nozzle and find that it is screwed on tightly, you may need to purchase a new nozzle altogether.