What is the MSDS for hydrogen peroxide?
Hydrogen Peroxide irritates respiratory system and, if inhaled, may cause inflammation and pulmonary edema. The effects may not be immediate. Overexposure symptoms are coughing, giddiness and sore throat. In case of accidental ingestion, necrosis may result from mucous membrane burns (mouth, esophagus and stomach).
Is 3% hydrogen peroxide hazardous?
Hazard statements: May cause fire or explosion; strong oxidizer Harmful if swallowed Causes severe skin burns and eye damage Harmful if inhaled Precautionary statements: If medical advice is needed, have product container or label at hand Keep out of reach of children Read label before use Page 2 Safety Data Sheet …
Is 3% hydrogen peroxide corrosive?
Hazards Associated with Hydrogen Peroxide Hydrogen peroxide is a strong oxidizer (moderate oxidizer in lower concentrations), and can be corrosive to the eyes, skin, and respiratory system. This chemical can cause burns to the skin and tissue damage to the eyes.
What is Section 3 of the MSDS?
Section 3 – Composition/information on ingredients identifies the ingredient(s) contained in the product indicated on the SDS, including impurities and stabilizing additives. This section includes information on substances, mixtures, and all chemicals where a trade secret is claimed.
Is hydrogen peroxide a hazardous material?
Hydrogen peroxide can cause irritation to the eyes, nose, skin, and throat. Workers may be harmed from exposure to hydrogen peroxide. The level of exposure depends upon the dose, duration, and work being done. Hydrogen peroxide is used in many industries.
What are the label codes for hydrogen peroxide?
Chemical Identifiers
| CAS Number | UN/NA Number | DOT Hazard Label |
|---|---|---|
| 7722-84-1 | 2014 | Oxidizer Corrosive |
| NIOSH Pocket Guide | International Chem Safety Card | |
| Hydrogen peroxide | HYDROGEN PEROXIDE (>60% SOLUTION IN WATER) |
What is the pH of hydrogen peroxide 3 %?
~6 pH
Due to the ~6 pH of the 3% hydrogen peroxide matrix, the method’s acid volume parameter was reduced to 0.1 mL.
What metals react with hydrogen peroxide?
Hydrogen peroxide decomposes into water and oxygen upon heating or in the presence of numerous substances, particularly salts of such metals as iron, copper, manganese, nickel, or chromium.
What ingredients are required on SDS?
The SDS includes information such as the properties of each chemical; the physical, health, and environmental health hazards; protective measures; and safety precautions for handling, storing, and transporting the chemical.
What is hydrogen peroxide primary hazard?
Hydrogen peroxide solutions of 20% to less than 35% can cause serious eye damage. Corrosive. materials are capable of producing severe eye burns and permanent injury, including blindness, depending on the concentration of the solution and duration of contact.
What is the primary hazard class for hydrogen peroxide?
H2O2 is rated as a Class 4 Oxidizer, Corrosive and a Class 3 Unstable (reactive) substance.
What is the product name for hydrogen peroxide?
Identification Product Name Hydrogen peroxide, 3 wt.% solution in water, stabilized Cat No. : AC426000000; AC426000010; AC426000250; AC426001000
What are the physical and chemical properties of hydrogen peroxide?
Hydrogen peroxide, 3 wt.% solution in water, stabilized Revision Date 25-Jan-2022 9. Physical and chemical properties Physical StateLiquid AppearanceClear OdorSlight Odor ThresholdNo information available pHNo information available Melting Point/Range0 °C / 32 °F Boiling Point/Range100 °C / 212 °F @ 760mmHg
How much hydrogen peroxide is in Acros organic one reagent?
Acros Organics One Reagent Lane Fair Lawn, NJ 07410 Serious Eye Damage/Eye Irritation Category 2 Page 1 / 8 Hydrogen peroxide, 3 wt.% solution in water, stabilized Revision Date 25-Jan-2022 Precautionary Statements Prevention Wash face, hands and any exposed skin thoroughly after handling
What is the revision date for 7 8 hydrogen peroxide?
Page 7 / 8 Hydrogen peroxide, 3 wt.% solution in water, stabilized Revision Date 25-Jan-2022 Revision SummaryThis document has been updated to comply with the US OSHA HazCom 2012 Standard replacing the current legislation under 29 CFR 1910.1200 to align with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS).