What is the most efficient HHO generator design?
Based on the results of the study, the best variation of HHO generators is found in the hole plate electrode 2 with the required power of 180.78 watts and an efficiency of 63.8%.
How does a dry cell HHO work?
1. A dry cell type HHO generator, in which most of the electrodes are not immersed in electrolytes and the electrolyte only fills the gaps between the electrodes themselves. The advantages of a dry cell HHO generator are: ▪ Water fills the gap between the plat cells, the electrodes are not completely waterlogged.
Which metal is best for HHO generator?
The results of performance characteristics comparation of HHO generator show that HHO generator with stainless steel 316 electrodes have better performance compared to HHO generator with titanium electrodes.
How many plates do you need for a HHO generator?
The seven plate design forms six electrolysis reaction chambers where there is one positive, one negative positive and five neutral plates.
How much power does a HHO generator need?
about 220 – 360 watts
Easy… a typical hho generator on your car, will operate on 12-13 volts and 17 to 30 amps on average. That is about 220 – 360 watts of power (V x A = W).
What is the best catalyst for HHO production?
The concentration of NOx, CO and HC gases has been reduced to almost 15%, 18% and 14% respectively on average when HHO is introduced into the system. 4. The best available catalyst was found to be KOH, with concentration 6 g/L.
Which salt is best for electrolysis?
Lye was the most efficient of those tested, harnessing over twice the hydrogen that iodized table salt did. But lye is more than twice as expensive as iodized table salt, making iodized table salt the most economical choice.
How much HHO is needed to run an engine?
We have since found that the correct amount of HHO to use is closer to 1/8 of a liter per minute per liter of engine size. But the measurement of HHO flow must be made with more precise equipment calibrated for HHO.
Is stainless steel good for electrolysis?
Stainless Steel (S.S) alloy gives superior behaviour in the electrolysis process, in the current study S.S types 316, 409, 410 and 430 (table 1 shows the chemical composition for the selected materials) were used as an anode and as a cathode in the electrolysis process at different temperatures (60,70,80 and 90 0C).
How efficient are HHO generators?
The current efficiency of the hydrogen generator is 89.13 %. The highest volume of resulted gas from electrolysis process is 0.9250 LPM at the 0.05 M solution concentration in 15 A.
How many amps does a HHO generator use?
Easy… a typical hho generator on your car, will operate on 12-13 volts and 17 to 30 amps on average. That is about 220 – 360 watts of power (V x A = W). Now lets say you pump 24 volts in at 30 amps, and suddenly you are pumping 720 watts, which would double production (but overheat the unit in a short time).
What is the difference between wet and dry HHO cells?
Although submerged HHO wet cells had their day and were valuable for experiments they are no longer cutting edge technology. Everything from stainless steel wire, kitchen appliances and stainless steel plates has been dipped into water and used for electrodes. HHO dry cells run cooler and more efficient.
Is the hho2u HHO dry cell the best?
Since HHO2u released their HHO dry cell many people have copied the design and for good reason, the construction of this hho dry cell is no doubt the best hho dry cell design out on the market to date.
How to produce optimal amount of HHO gas with dry cell HHO generator?
This recirculation process along with the configuration of holes, the processing of the stainless steel and the assembly is what will produce optimal amounts of HHO gas with a dry cell hho generator.
Why does my HHO dry cell need to run cooler?
This circulation of the water helps in cooling the water before it returns to the HHO dry cell. Not only does this make your HHO dry cell run cooler but running cooler allows your HHO dry cell to be much more efficient.