What is the image unit on a printer?

The imaging drum is the heart of the laser printer or the copier. It transfers the print image, consisting of toner, onto the paper. An imaging drum is also called OPC, imaging unit or just drum by some manufacturers. A dirty or worn out drum reduces extremely the printing quality of a laser printer.

Table of Contents

How do I change my imaging unit?

Replacing the imaging unit

Open the front cover, and then remove the toner cartridge.
Pull the imaging unit straight out using the groove.
Remove the new imaging unit from the packaging.
Before inserting the new imaging unit, make sure to remove the protective plastic tab.

What is a Lexmark Imaging Unit?

The Lexmark Return Program Imaging Unit is designed to work with Unison toner cartridges. With a page yield of 60000 pages, it provides a long-lasting performance. This black imaging unit is compatible with select Lexmark printers.

How do I change the imaging unit on my Lexmark printer?

Replacing the imaging unit

Open the front door.
Remove the used imaging unit.
Remove the toner cartridge from the used imaging unit.
Unpack the new imaging unit, and then insert the toner cartridge.
Insert the new imaging unit.
Close the door.

How do I fix my imaging unit Lexmark?

Replacing the imaging unit

Lift the front cover, and then pull down the multipurpose feeder door.
Pull out the toner cartridge from the printer using the handle.
Lift the green handle, and then pull out the imaging unit from the printer.
Unpack the new imaging unit, and then shake it.

What is the imaging unit on a Lexmark printer?

How long does an imaging drum last?

Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

How do I clean my Lexmark Imaging Unit?

Here’s what the drum looks like:

Step 1: Switch Off, Cool Down.
Step 2: Removing and Cleaning the Toner Cartridge.
Step 3: Remove Excess Toner from Internal Components.
Step 4: Swab Surfaces with Isopropyl Alcohol.
Step 5: Reassemble.