Discover the world with our lifehacks

What is the best motor to use for a wind generator?

What is the best motor to use for a wind generator?

You should be looking for a motor with a minimum amperage rating of at least 5 Amps. Anything above 5 Amps and you are good to go. Remember, the more amps and volts the wind generator creates the more power it is producing!

What is the best blade for a wind turbine?

So which type of blade shape would produce the greatest amount of energy for a wind turbine – Flat blades are the oldest blade design and have been used for thousands of years on windmills, but this flat broad shape is becoming less common than other types of blade design.

How much are wind turbine blades worth?

For a 1.5-MW turbine, typical blades should measure 110 ft to 124 ft (34m to 38m) in length, weigh 11,500 lb/5,216 kg and cost roughly $100,000 to $125,000 each. Rated at 3.0 MW, a turbine’s blades are about 155 ft/47m in length, weigh about 27,000 lb/12,474 kg and are valued at roughly $250,000 to $300,000 each.

Will bigger blade make your windmill turn faster?

When it comes to wind turbines, bigger is definitely better. The bigger the radius of the rotor blades (or diameter of the “rotor disc”), the more wind the blades can use to turn into torque that drives the electrical generators in the hub. More torque means more power.

What motors make good generators?

2 Answers. Show activity on this post. Brushless DC motors (BLDC) or permanent-magnet synchronous motors (PMSM) are pretty much the same thing and are the best to use as generators. They generate AC, so they require a rectifier on the output.

Can a car alternator be used for a wind turbine?

When one uses a Delco car alternator as a wind generator, it is absolutely necessary to modify the alternator to operate at low RPMs. This is accomplished with two intricate modifications: One replaces the stock Delco car alternator stator windings with a stator that has more turns of smaller gauge wire.

Which is better 3 blade or 5 blade wind turbine?

Compared to the traditional three blade wind turbine, a five-blade turbine can increase annual performance by more than 60%. The speed of the blades of a five-blade turbine is 60% of the three-blade wind turbine. Five-blade wind turbines greatly reduce the chance of high-speed malfunction.

Should wind turbine blades be heavy or light?

Wind turbine blades should be light as they are more efficient when they are lighter. It makes the wind turbines easier to assemble and disassemble while making them easier to turn, enhancing their performance.

How big is a 10kW wind turbine?

Our 10 kW unit, the BWC EXCEL 10, is the best-selling residential unit in the U.S. It has a rotor diameter of 23 feet and is typically installed on 80 or 100 foot towers.

How long should wind turbine blades be?

Turbine blades vary in size, but a typical modern land-based wind turbine has blades of over 170 feet (52 meters). The largest turbine is GE’s Haliade-X offshore wind turbine, with blades 351 feet long (107 meters) – about the same length as a football field.

Can you use any motor as a generator?

You can use just about any motor to generate electric current, if it is wired correctly and you follow specific rules for its use. Modern AC induction motors are quite simple to wire as alternating current generators, and most will begin generating electricity the first time you use them.