What is braided sleeving used for?

Braided sleeving is most commonly used to effectively jacket and protect wire components, cable assemblies, wire harnesses, as well as a variety of commonly used industrial tubes and hoses.

Table of Contents

What size braided sleeving do I need?

If you’re aiming for a snug fit, opt for braided sleeving with a diameter that’s slightly smaller than that of your cables. If a loose, flexible fit is what you’re after, select sleeving with a diameter that is equal to or slightly larger than the diameter of your cables.

How do you braid a sleeving?

The Process

Step 1: Plan and Prepare. Order of operations matters.
Step 2: Cut and Flair. With a pre-heated hot-knife, make the first cut.
Step 3: Apply the Braided Sleeving.
Step 4: Make the Second Cut.
Step 5: Finish The Connections.
Step 6: Apply Heat Shrink.

How do you secure braided wire?

After you’ve run your cables or wires through braided sleeving, simply wrap the ends tightly with electrical tape. Cable ties provide a quick solution for neatly terminating braided sleeving, and have the added benefits of being inexpensive and sold to match your sleeving’s color.

How do you seal braided sleeving?

Basically, there are four ways to do it: With Tape….

Tape. Number one is the most economical and least time consuming way of terminating expandable braided sleeving.
Cable Ties. The second way to neatly terminate the end of your braided sleevings is to use cable ties.
VELCRO® brand ONE-WRAP® cable wraps.
Heat Shrink Tubing.

How to terminate your wires in braided sleeving?

Plan and Prepare. Order of operations matters.

Cut and Flair. With a pre-heated hot-knife,make the first cut.

Apply the Braided Sleeving. The mechanics of braided sleeving is similar to the famous Chinese Finger Trap.

Make the Second Cut. Recall that as the sleeving expands,it compresses radially.

Finish The Connections.

Apply Heat Shrink.

What is the function of a braided wire?

Braided

Mesh or grid

Sheet or strip

Solid Wire

What is the purpose of a braided or stranded wire?

Prepare the Wire. Tinning must be done on bare wire.

Prepare the Soldering Iron. Plug in and turn on the soldering iron,and let it heat up.

Apply Solder to the Wire. Extend the solder from its spool in a straight line.

Let the Wire Cool. Let the solder cool,then inspect the results.

How to install Pan wrap braided sleeving?

Provides better protection than spiral wrap or braided sleeving, and keeps cables in marine, automotive and a variety of other environments safe from crushing and abrasion. When drilling holes is not an option, these adhesive-backed cable tie mounts grip just about any smooth surface to route cables both indoors and outdoors.