What does F13 mean on a Hotpoint washing machine?
An F13 fault code relates to a faulty sensor within the dryer heater assembly. Hotpoint have changed the design of the sensor from this, to this, so if you have this type of sensor in your machine and you’re experiencing an F 13 fault we recommend you change it to this sensor.
How do you fix F13 on a washing machine?
Whirlpool error F13 or F22 A buildup of soap, dust, or an overloaded drum may cause the door to not close properly. Wipe the door lock clean with a wet towel or remove some clothes from the drum. Try to start the wash cycle again.
How do I reset my Hotpoint Aqualtis washing machine?
To activate hold start/reset and the 4th button (bottom one) for six seconds and “D” will be displayed in the spin speed display. To deactivate, press and hold start/reset as power is applied for three seconds.
How do I fix my F13 Hisense washing machine?
If fault code “F13” is shown Door lock is abnormal. Start program for 20 sec and unlock the washer door (PTC) to check whether the door is closed. Open or close it again. After fault is removed, press “Start/Pause” key.
What does F13 mean on dishwasher?
If your dishwasher is beaming at you with an F13 error code on the control panel display, it is likely to be a fault with the water softener or the hardness of the water in the machine.
How do you read Hotpoint error codes?
What do your washing machine error codes mean?
- F01 — Electronic circuit board fault.
- F02 — Motor circuit fault.
- F03 — Temperature sensing fault.
- F05 — Waste pipe blockage or pump issue.
- F06 — Door lock fault.
- F07 — Electronic circuit board fault / heating circuit fault.
- F08 — Heater fault.
- F09 — Software fault.
What does F13 mean on a boiler?
F13 is a boiler fault code. It indicates a PCB (main) connection failure due to wiring, or connections. This might occur as a result of a high central heating temperature (exceeding 95 degrees C), due to system failure or possible pump failure. The thermometer must be checked in the flow.
What does F13 mean on Miele dishwasher?
Water intake
Miele Dishwasher Error Code = The display shows fault code F12 or F13 (Water intake). Cause Of Error/Fault Code = Stopcock is closed. How To Fix & Clear Error Code: 1 – Turn on the water supply at the stopcock. 2 – Water inlet filter is clogged.
How do I fix my F13 Miele dishwasher?
Check the drain hose and drainage for blockages and clean. Miele Dishwasher Error Code = The display shows fault code F12 or F13 (Water intake). Cause Of Error/Fault Code = Stopcock is closed.