What does E011 mean on a Bosch oven?

E011 — Long pressing of one of the buttons the malfunction may occur due to water or dirt entering the control panel; For this, the control panel needs to be cleaned of the dirt and the moisture.

Table of Contents

How do I reset the error code on my Bosch dishwasher?

To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”. These older models require a specific Button Press Sequence or what we in the biz call a Key Dance to complete.

How do I reset my Bosch oven?

Reset the oven by turning it off at the breaker. Wait 30 minutes, then turn the breaker on. The oven should return to normal. However, if the error code appears again, please take note of it and call Bosch Customer Support at 1-800-944-2904.

Why does my Bosch oven keep beeping?

Most ovens beep when the preheating cycle is complete. This gives the user the freedom to walk away from the oven and still know when it is ready for use. If you dislike the preheat notification, it may be possible to turn it off, but it depends on the model and brand of oven.

What does E302 mean on a Bosch oven?

E302 means that the oven thinks the convection fan motor has shorted and needs to be replaced. You’ll need to flip the circuit breaker off to the oven or unplug the oven. Then open the door and remove all the oven racks and such.

How do you clear a dishwasher error code?

This can usually be corrected by performing the following steps:

Press the POWER button to turn the dishwasher off.
Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
Turn the circuit breaker to the dishwasher back ON.
Press the POWER button to turn the dishwasher ON, and start a new cycle.

Why is my Bosch oven not working?

#1 – No Power to Bosch Oven Make sure your oven is properly plugged in. Refrain from using an extension cord with your oven, as most cords can’t safely transmit the electricity an oven requires. Check your circuit breaker for blown fuses or tripped breakers, especially if you experience a power outage.

How do you reset a Bosch oven after a power cut?

How To Reset Your Oven After a Power Surge: 5 Steps

Step 1: Check the Breaker Box.
Step 2: Make Sure the Fuses Are Still Good.
Step 3: Check the Power Cord.
Step 4: Reset the Electronic Control Panel.
Step 5: Try to Give the Oven a Cycle To Complete.
The Control Panel Is Locked.
You Have the Delay Start Turned On.

How do I get my oven out of lock mode?

To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it’s unlocked. If this doesn’t work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.

How do I unlock my Bosch?

Here is how to unlock it-

Press and hold the start button for three to five seconds until you hear a beep and the key symbol disappears.
Another way is to press and hold the “rpm” and the “finished in” buttons together until you hear a beep and the symbol disappears.