What capacitance value is 103?

10,000 pF 0.01
For codes S, X, and Z, the actual capacitance may be as much as 20% below the stated value or as much as 50%, 40%, or 80% over the stated value….Beta Program.

Table of Contents

Marking	Capacitance (pF)	Capacitance (ìF)
103	10,000 pF	0.01 ìF
223	22,000 pF	0.022 ìF
473	47,000 pF	0.047 ìF
104	100,000 pF	0.1 ìF

What value is a 103 ceramic capacitor?

0.01uF
Capacitor Code: 103. Voltage Rating: 50V. Capacitance: 0.01uF (10nF)

How do I calculate how much capacitor I need?

The amount of charge stored in a capacitor is calculated using the formula Charge = capacitance (in Farads) multiplied by the voltage. So, for this 12V 100uF microfarad capacitor, we convert the microfarads to Farads (100/1,000,000=0.0001F) Then multiple this by 12V to see it stores a charge of 0.0012 Coulombs.

How do you calculate 104 capacitor?

For code 104, the third digit is 4, so you have to write 0000 (4 zeros) after the 10 (first two-digit). So the capacitance value for 104 will be 100000 picofarads or 100 nanofarads or 0.1 microfarad.

What is the value of 102 capacitor?

1.000 pF
For example: A capacitor with the number 102 printed on it means a 10 with two zeros. The value in this case is 1.000 pF or 0,001 µF also named 1 nf.

What is a 4n7 capacitor?

For example, a capacitor can be labelled as, n47 = 0.47nF, 4n7 = 4.7nF or 47n = 47nF and so on. Also, sometimes capacitors are marked with the capital letter K to signify a value of one thousand pico-Farads, so for example, a capacitor with the markings of 100K would be 100 x 1000pF or 100nF.

What does Z mean on ceramic capacitor?

The “Z” tolerance is most often omitted. If there is no letter after the value then assume it to be “Z”. IE: The actual value could be double the shown value or 80% of the shown value – or anything in between. These are suitable as noise decoupling and/or differential coupling applications.

How can I convert pF to uF?

Convert between uF, nF and pF using the Newark’s uF – nF- pF conversion chart below….Capacitor uF – nF – pF Conversion.

uF/ MFD	nF	pF/ MMFD
0.001uF / MFD	1nF	1000pF(MMFD)
0.00082uF / MFD	0.82nF	820pF (MMFD)
0.0008uF / MFD	0.8nF	800pF (MMFD)
0.0007uF / MFD	0.7nF	700pF (MMFD)

How do you calculate Microfarad?

To convert a farad measurement to a microfarad measurement, multiply the capacitance by the conversion ratio. The capacitance in microfarads is equal to the farads multiplied by 1,000,000.

How do you calculate the capacitor on a single phase motor?

Use our capacitance calculation formula. C(µF) = 746 x 80 x 1000 / (220 x 220 x 50) = 24.66 µF. Hence 1 HP Motor required 24.66 µF capacitance to start the motor smoothly. But in the market, you can get 25 µF.

What is the value of capacitor 106?

So, for example, if the digits are ‘106’, this equals a capacitance value of 10μF. The first 2 digits are ’10’ and the multiplier factor is 1,000,000, so the value is 10,000,000pF or 10μF (10pF x 1,000,000= 10,000,000pF= 10μF).

What is capacitor value/code calculator?

This Capacitor Code Calculator calculates the ceramic capacitor code upon providing the capacitance value of the capacitor in the input field below. How Capacitor Value/Code Calculator Works?

What is a 3 digit capacitor code?

For 3 digit’s capacitor code, the first two digits are the capacitance value in pF and the third digit is a multiplier factor of first two digits to calculate the final capacitance value of the capacitor. The 3 rd digit ranges between 0-6.

How do you calculate the capacitance of a ceramic capacitor?

The capacitance value will be calculated as follows: 15*100 = 1500 pF. So this is how a capacitor value/code calculator calculates the ceramic capacitor value from the capacitor code, or vice versa.

What is the value of a 130 code capacitor?

If you have a code of 130, then you would take 1 and 3 at value. The third digit is zero and means to multiply times one. Since one times anything is itself, 1 X 13 is just 13. So the value of a 130 coded capacitor is 13. Another example of 103.