What are the dimensions of a standard fireplace?
The average fireplace is approximately 36 inches by 30 inches, but there is plenty of variation in the fireplaces available on the market. The most common fireplace sizes are: 24 inches by 24 inches.
What is the standard size of a fireplace opening?
Standard Fireplace Opening Dimensions What is this? The standard height of a fireplace’s opening is between 24 to 29 inches and 24 to 36 inches wide.
How deep are see through fireplaces?
24″
36″ See-Through Gas Fireplace – DV
| Appliance Width: | 42-1/2″ |
|---|---|
| Appliance Depth1: | 24″ |
| Appliance Rear Width: | 42-1/2″ |
| Framing Width: | 43″ |
| Framing Height: | 38-1/8″ |
What is the minimum depth of a fireplace?
20 inches
The firebox of a concrete or masonry fireplace shall have a minimum depth of 20 inches (508 mm). The throat shall not be less than 8 inches (203 mm) above the fireplace opening. The throat opening shall not be less than 4 inches (102 mm) in depth.
How do you calculate the opening of a fireplace?
Step 1: Find the cross-sectional area of the fireplace opening. Multiply the W=36″ X H=30″ and that equals 1080 square inches of fireplace opening. Step 2: If you are using a round liner and the chimney height is more than 8′ above the fireplace opening you can divide the 1080 by 12. This amount equals 90″.
What is the standard width of a fireplace hearth?
The standard fireplace opening averages between 24 – 36 inches wide, 24 – 29 inches high, and about 16 inches deep. The distance from the hearth to the fireplace damper should be about 37 inches. The rear of the firebox should be 11 – 19 inches wide and right at 14 inches high.
What is a good width for a fireplace?
A 36″ or 42″ fireplace opening width is more common, but you need to assume about 18″ on each side for a typical non-combustible surround and wood mantel, 24″ on each side for something more grand.
What is a see through fireplace called?
Twilight Modern. The first indoor/outdoor gas fireplace trends ahead with the Twilight Modern see-through model. Artistic flames rise through crushed glass with no chimney or venting needed in a contemporary design.
How much does a see through fireplace cost?
Starting at $4,687. The Heatilator gas see-through series adds architectural interest to every home, offering dramatic viewing of the fire from two separate rooms. The design possibilities for dividing a space is made easy.
How deep should a fireplace wall be?
Most linear models of electric fireplaces can use a depth of anywhere from 4.25 inches to 12 inches of depth.
How thick should a fireplace be?
InterNACHI recommends that for any size fireplace opening, the thickness of a hearth should be at least 4 inches (102mm).
How far should the hearth of a wood burning fireplace project into a room?
So how far should a fireplace hearth come out? InterNACHI recommends that for fireplaces that have an opening of 6 square feet (0.56 square meters) or smaller, a hearth should extend at least 16 inches (406mm) out into the room from the opening, and by at least 8 inches (203mm) away from the sides.