What alloy is Linotype?
Linotype or eutectic alloy is a broad name applied to five categories of lead alloys used in manufacture of type, each with three to five sub-classifications. One alloy is composed of lead with 4% tin and 12% antimony.
What is the hardness of Linotype?
Linotype is typically known to be too hard for hunting as it will shatter upon bone contact. It is great for high velocity target bullets. Blended 1 to 1 with pure lead, this alloy can produce Hardball alloy. The Brinell Hardness of Linotype alloy is approximately 22.
What is lead alloy in bullets?
Lead (Pb) is a heavy, malleable metal that helps carry a bullet’s momentum until it reaches the target. Lead can be heat treated to lessen brittleness and conducts heat very slowly, making it an ideal alloy for bullet making. Mayer Alloys, a master distributor for AIM, offers bullets made of hard lead alloy.
What is Linotype lead used for?
|Lead base alloy for casting bullets and fishing jigs. Linotype will have a brinell hardness and good strength. Used to be used a lot in the printing industry.|
|Forms:||10-20 Mesh 0.078″ x 0.033 12-30 Mesh .0661 in. – .032″ 20-25 Lb. Pig 40 Lb. Pigs Approx. 40 Lb. Pigs|
|Belmont Product Code||5841|
What temperature does Linotype melt at?
Melting Point-Solidus: 237 C, 459 F.
What is #2 lead alloy?
Description. Hardball Bullet Casting Alloy consists of 2% tin, 6% antimony and 92% lead. This modern version of the old Lyman #2 is an excellent all-around alloy for most handgun bullets and many higher velocity rifle cartridges. The Brinell Hardness of Hardball Alloy is about 16.
What is Linotype composition?
Linotype, (trademark), typesetting machine by which characters are cast in type metal as a complete line rather than as individual characters as on the Monotype typesetting machine. It was patented in the United States in 1884 by Ottmar Mergenthaler.
What is #2 alloy?
Hardball Bullet Casting Alloy consists of 2% tin, 6% antimony and 92% lead. This modern version of the old Lyman #2 is an excellent all-around alloy for most handgun bullets and many higher velocity…
What is wheel weight alloy?
Wheel weight alloy is an ideal bullet alloy for heat treating because of its percentage of antimony and a trace of arsenic. This alloy can be heat treated to 30+ BHN. Most loads do not generate nearly enough pressure to cause obturation at 30 BHN and yes, obturation is a good thing.
What is hardball alloy?
What is the best lead for casting bullets?
One of the hardest and most accurate alloys for casting bullets is linotype metal, which is 4 percent tin and about 11 percent antimony. It can be bought at some print shops or as scrap. It is usually a good bit more expensive than scrap lead, but it makes great bullets if you want top accuracy.
What is hot metal composition?
Hot metal (blast-furnace iron) Most blast furnaces are linked to a basic oxygen steel plant, for which the hot metal typically contains 4 to 4.5 percent carbon, 0.6 to 0.8 percent silicon, 0.03 percent sulfur, 0.7 to 0.8 percent manganese, and 0.15 percent phosphorus.