How do you decode a Mopar fender tag?

plant fender tag is somewhat unique compared to other 1969 tags. The bottom row, to the left, has the 4-character car line and model code (same as the V.I.N. first 4), followed by a 3-character engine code. These are followed by a 2-character transmission code, then the 3-digit build date and the vehicle order number.

Table of Contents

How can you tell if a 1966 GTO is real?

After its initial success, the GTO became its own model starting in 1966, so true ’66 and ’67 GTOs can easily be identified if the second and third digits of the VIN are 42. The VIN plate should be in the forward jamb of the driver’s door.

What are fender tags?

The fender tag can be found on the driver’s side inner fender on most models. Sometimes they will be attached to the radiator core support, cowl or A-pillar on older model cars. They are usually attached with machine screws or riveted in place. Typical 1969-1980 fender tag.

How do you read a Plymouth VIN number?

VIN Decoding – American Mopars

FIRST DIGIT: Model or Car Line. B.
SECOND DIGIT: Price Class. E.
THIRD AND FORTH DIGITS: Body Type.
FIFTH DIGIT: Engine (I’ve listed years next to the number of cylinders as I don’t have all the 1970 engine codes)
SIXTH DIGIT: Model Year’s Last Digit.
SEVENTH DIGIT: Assembly Plant.
A-BODY.
B-BODY.

What is a 1966 GTO worth?

Typically, a 1966 Pontiac GTO in a mint condition with lower mileage (less than 10K) could fetch as much as $100,000. The most expensive model auctioned out so far cost $184,250.

How do you decode a Chrysler VIN?

How to Decode a Chrysler VIN?

1 – Country (USA)
C – Manufacturer (Chrysler)
3 – Vehicle Type (Passenger Car)
CCBBG – Description (Touring/4DR/Sedan/Chrysler 200)
5 – Check Digit.
C – Model Year (2012)
N – Assembly Plant (Sterling Heights, Michigan)
288927 – Production Sequence Number.

Is the Pontiac GTO rare?

Only 142 GTOs were built like this two-owner example. Over the course of its three-year lifespan (2004-06), production of the Australian-made Pontiac GTO was capped at just over 40,000 units, so that means just about every build combination is considered rare today.

What Motor came in a 1966 GTO?

389 cubic-inch
When it came to engines, the standard GTO engine was a 389 cubic-inch, four barrel carburetor with 335 horse power. The GTO option was rated at 360 horsepower and had three two-barrel carburetors. If a consumer wanted to purchase a new 1966 GTO model, the base price for a sports coupe was $2,783 dollars.

How do I know what kind of Chrysler I have?

Every Chrysler car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.