How do I update my Alpha 100?

How do I update my Alpha 100?

Once you have installed the software on your computer, updating the Alpha 100 Handheld and TT Collar is pretty easy.

1. Connect it to your computer with the USB cable and run the WebUpdater software.
2. It will automatically detect your Alpha 100 and prompt you through the process step by step.

How do I update my tt15?

To Update Your Garmin TT 15 with WebUpdater on Windows:

1. Connect your Garmin device to the computer with the appropriate USB cable.
2. Launch WebUpdater.
3. Select the desired device from the drop-down menu or click Find Device if your device isn’t listed.
4. WebUpdater will display the available updates.

How can I update my Alpha 200i?

How to Update your Garmin Alpha 200i

1. Connect your Alpha 200i handheld to a computer using the micro-USB to USB connection. Then use Garmin Express to install updates.
2. You can receive updates over the air when connected to a Wi-Fi network.

How do you use Alpha 100?

One Alpha 100 handheld can track up to twenty devices (TT 10 dog device collars and Alpha 100 handhelds). by holding the Power key until the status LED turns red, about 3 seconds, and release. collar emits two series of beeps, about 2 seconds, and release. The status LED begins blinking rapidly.

What collars will the Alpha 100 track?

The Alpha 100 is compatible with TT10, TT15, and T5 collars to track up to 20 dogs.

How do I update my dog’s Garmin tracking collar?

Updating your Garmin Collars

1. Step 1: Connect your collar to you computer using the USB cord and charging clip/cable. Plug the end of the Mini USB into the end of the charging clip/cable.
2. Step 2: Open Garmin Express. Click Add a Device.
3. Step 3: Garmin Express will now show you that an update is available.

How do I update my DC 50 collar?

To Update Your Garmin DC 50 Collar with WebUpdater on Windows:

1. Connect your Garmin device to the computer with the appropriate USB cable.
2. Launch WebUpdater.
3. Select the desired device from the drop-down menu or click Find Device if your device isn’t listed.
4. WebUpdater will display the available updates.

How do I train my dog with Alpha 100?

Customizing the Training Keys

1. Select Setup > Training > Training Buttons > Change Mode.
2. Select.
3. Select the dog you want to train with this key.
4. Select or.
5. If you are using traditional stimulation mode, select LOW, MED, or HI.
6. Select momentary (M), continuous (C), tone (T), or vibration (V).

How do you update Garmin dog collars?

How do I download maps to my Garmin Alpha 100?

Downloading BirdsEye Imagery

1. Start the BaseCamp application, and connect the device to your computer.
2. Select BirdsEye in the menu bar.
3. Select Download BirdsEye Imagery…
4. From the drop-down list, select your purchased subscription and select Continue.