Pfeiffertheface.com

Discover the world with our lifehacks

How do I turn on my passport radar?

How do I turn on my passport radar?

Press and hold to manually turn the 9500ci on or off. If installed properly, the system will turn on or off automatically with the ignition. Press and hold the VOL button on the controller to adjust the alert volume level. The audio will ramp up to increase, down to decrease, accompanied by a bar-graph on the display.

How do I reset my passport radar detector?

Passport 8500 Series Press and hold the “CITY”, “DIM” and “MUTE” buttons while turning the power on. The display will provide a RESET message, accompanied by an audible alert, acknowledging the reset.

How do I turn off the K band on my Passport 9500ix?

Once you hook it up and open the software, go to User preferences > Bands. There you can turn on and off all bands to include Laser, POP etc…

How do I connect my Bluetooth to my passport x70?

To pair your Smartphone with PASSPORT: 1 Ensure PASSPORT power is ON. 2 On your Smartphone go to Bluetooth Settings. 3 Ensure Bluetooth is ON. 4 Press Scan for devices and/or wait for the device list to populate, PASSPORT should appear under devices.

How do I reset my passport Max?

To restore PASSPORT Max to its original factory settings, press and hold the SEN and BRT buttons while powering on the detector. A “Restored” message will display, acknowledging the reset. To view your device’s serial number and software version, press and hold the MRK and MUTE buttons while powering on the detector.

What is the best setting to have your radar detector on?

front windshield
A radar detector is best mounted as high up in the vehicle as possible so that the detector has a good range of radar detection. The most common and the standard location for mounting the radar detector would be on the front windshield of the vehicle, near or around the center of the rearview mirror.

What is a pop alert on a radar detector?

POP Mode, when turned on, enables the detection of a special band of radar known as “POP.” This is a very short transmission signal that allows the user of a radar gun to capture a quick read of a vehicle’s speed prior to setting the gun to another band.