How do I setup my TL wr740n router?

How do I setup my TL wr740n router?

Switch on the router and connect ALLNET internet cable to the WAN/Internet port of the router. Go to setting in the Mobile, turn on Wi-Fi and wait until the mobile detects router name press the router name to connect. If the router is already configured and the Wi-Fi password is known then go to settings in the Mobile.

How do I split my 2.4 GHz and 5GHz TP-Link?

Step 1 Click Advanced>Wireless>Wireless Settings. Step 2 Click 2.4GHz, and change Channel and Channel Width, then click Save. Step 3 Click 5GHz, and change Channel and Channel Width, then click Save. For 5GHz, we recommend you use channel in Band 4, which is channel 149-165, if your router supports it.

How do I reset my TL wr740n?

How to reset a router to factory defaults

1. Step 1: Find the reset button. There should be a tiny reset button.
2. Step 2: Push the reset button. While the router is on, push and hold the reset button.
3. Step 3: Hold the reset button.
4. Step 4: Reboot the router.
5. Step 5: Log in to the router.

How do I enable wifi on my TP-Link Router?

Via Web Management:

1. Verify the hardware connection and make sure your router is connected to the Internet.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
3. Go to Advanced> Wireless> Wireless Settings and enable Smart Connect.
4. Customize your network name and password.

How do I change from 2.4 GHz to 5GHz?

On most Android devices you can tap Settings > Connections > WiFi. Then select the network you want to use from the list of available networks.

How can I have 2.4 GHz and 5GHz?

How To Use 2.4GHz and 5GHz at the Same Time

1. Verify you have a simultaneous dual-band router instead of a selectable dual-band.
2. Go to the wireless settings and verify your selection of both 2.4GHz and 5GHz bands.
3. Leave both of them on and make sure to set the same SSID and password for both networks.

How do I reset my tp-link router username and password?

What if I forget the password of my TP-Link ID or the account is…

1. Step 1: On the Login page, click on Forgot Password.
2. Step 2: Enter your TP-LINK ID username (E-mail address), click on Send.
3. Step 3: Go to your E-mail Inbox, refer to the instruction to reset your password.

How do you set up Wi-Fi?

Option 2: Add network

1. Open your device’s Settings app.
2. Tap Network & internet. Internet.
3. At the bottom of the list, tap Add network. You may need to enter the network name (SSID) and security details.
4. Tap Save.

How does a router connect to the Internet?

Plug one end of an Ethernet cable into your modem. Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router. Plug in your router and allow at least 2 to 3 minutes for it to light up. Turn off your computer and connect an Ethernet cable to your computer.