How do I reset my EZ Guide 500?
Hard Reset As the display boots up, hold down the I, II, and III buttons (circled below). Once powered on, you will see the screen pictured below, confirming the hard reset.
How do I calibrate my EZ Steer 500?
If the EZ-Steer 500 system is connected to the lightbar, the EZ-Steer Calibration Wizard automatically appears after the Quick Start Wizard when the lightbar is turned on. Note — To manually start the EZ-Steer Calibration Wizard, select Configuration / Auto Steer / EZ-Steer / EZ-Steer Calibration.
How do you clear the memory on a Dell Trimble 500?
Select the Client line, press OK and then select “ALL” as your Client, press OK and then scroll up to “Continue” and press OK again. This should delete every Client/Farm/Field/Event from the display and leave you with your calibration settings intact.
How do you delete fields on EZ Guide 250?
Deleting Fields From the main guidance screen, select and press . The Configuration screen appears. 2. Select Configuration / Data Management / Manage Fields / Delete Selected Fields.
How accurate is EZ Guide 250?
With a built-in GPS receiver, you can reach sub-meter accuracy, and upgrade to the AG15 antenna and get 6-8” accuracy making the 250 a great buy for broadacre crop applications.
How do you delete fields on EZ Guide 500?
How does EZ Steer work?
EZ-Steer is a simple portable hands-free steering system for all vehicle models, old and new. The EZ-Steer system turns the steering wheel for you by combining a friction wheel and a drive motor, which is commanded indirectly by an output from the guidance display.
Who makes EZ Steer?
Trimble
The Trimble® EZ-Steer® assisted steering system provides simple, portable, hands-free farming for more than 1200 vehicle models – old and new.
How do I set up the EZ guide 500?
Please Note: The EZ Guide 500 comes set on ‘Easy Mode’. Please set the ‘User Mode’ is set to ‘Advanced’ so that the various settings shown in this How To Guide can be accessed. On the run/main screen press the down arrow until you have selected the icon and then press OK. The ‘Configuration’ screen appears shown in {Figure 1.1].
Which USB sticks are compatible with the EZ-guide 500?
(Not all)FAT/FAT32 USB sticks are compatible with the EZ-Guide 500. A green USB stick symbol will appear in the bottom left hand corner of the screen if the USB stick is compatible.
How do I transfer data from one ez-guide 500 to another?
Use the Data Managementmenu to: •Export field and event information to an external USB flash drive, so it can be loaded into another EZ-Guide 500 lightbar. Note — Never remove the USB flash drive while the lightbar is turned on.
How do I update the EZ-guide for the fm1000?
CNH Trimble Support Page 2.3.1 ASIST home page Once logged into assist, click on the ‘EZ- guide & FM1000 Software update information’ link shown across in [Figure 2.5] and choose EZ Guide 500. This will open the link to save the file. 2.3.2 CNH Trimble Support Page