How do I replace the lamp in my Epson 8350 projector?
Turn off power swtich on the back of the Epson PowerLite Home Cinema 8350 projector. Unplug the power cord….
- The cover for the Epson PowerLite Home Cinema 8350 projector lamp is found on top of the projector.
- Remove the two screws on either side of Epson ELPLP49 lamp.
- Pull the lamp out using the top handle.
Why is the lamp light flashing on my Epson projector?
Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. If operating the projector at high altitude, turn on High Altitude Mode.
How do I know if my projector bulb is bad?
Five Signs You Need a New Projector Lamp
- Complete Failure/Popping Sound. If you turn the projector on, hear an audible *POP*, then the screen goes completely dark, you’ve probably just heard your projector bulb burning out.
- Indicator Light/Message.
- Dim Light From Projector.
- Color Shifting.
- Image Flicker.
Why are projectors bulbs so expensive?
High-Pressure Mercury Vapor Technology The complexity of High Pressure Mercury Vapor lamps, and the toxicity of the mercury used to produce them, make them expensive to produce.
How do I increase the life of my projector lamp?
Follow these tips to make your projector lamp last longer!
- Watch the dust. Your DLP projector operates best in a relatively dust-free environment.
- Avoid frequent on and offs.
- Check the heat.
- Give it a rest.
- Let it cool.
- Keep it clean.
- Go eco.
- Install authentic lamps.
Why Do projector lamps fail?
Occasionally, at the end of its life the lamp may fail altogether, usually due to temperature stresses. Most modern projectors have a built-in lamp hour counter which will let you know when it is time to change your lamp, and this counter should be reset every time the lamp is changed.
How do I check the life of my Epson projector lamp?
Checking Lamp Life Press your projector’s “Menu” to launch the on-screen menu. Navigate to the “Setup” or “Options” heading. Navigate through the menu and select “Lamp Life” or “Lamp Hours” to view a summary of the hours left on your bulb or the hours it has been on.