How do I put a Plantronics Bluetooth in pairing mode?

Start with your Plantronics device powered ON, then press and hold the dedicated Bluetooth button until the LED flashes red and blue. Activate Bluetooth on your phone and search for new devices, the name of the Plantronics device will appear as “PLT” followed by the model name.

Table of Contents

How do I reset my Plantronics Explorer 210?

Turn your headset turned on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the button and set the headset aside.

How do I pair my Plantronics Explorer?

To pair the headset,

Turn on your device’s Bluetooth feature.
Turn the headset on. The light on the headset should start flashing an alternating red-blue.
On your cell phone, go to the Bluetooth menu and search for (or add) a device.
If prompted for a passkey, enter 0000 (four zeros).

Why won’t my Plantronics Bluetooth connect to my phone?

Power the cell phone on again. Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone. If the issue persists, replace the headset.

How do I pair my Plantronics Bluetooth headset to my phone?

Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.

How do I pair my Plantronics Bluetooth to my iPhone?

To pair your Plantronics Bluetooth headset with your iPhone:

On your iPhone, press Settings > General > Bluetooth.
If Bluetooth is turned Off, tap to turn it On.
Place your Bluetooth headset into pairing mode.
When you see your Plantronics device name, tap it to pair and connect.

Why is my Plantronics headset not connecting to PC?

Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports. Plug the headset directly into the PC and not into a hub or docking station.

How do I reset my Plantronics Bluetooth headset?

How to Reset a Plantronics Bluetooth

Turn on the headset by pressing the “Power/Answer” call button.
Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
Wait for one minute for the reset to be complete.
Turn on the headset again by pressing the “Power” button.

How do I reset my Plantronics Bluetooth?

Why won’t my Plantronics Bluetooth connect to my iPhone?

Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.