How do I log into my Cisco Linksys router?

How to access the router’s web interface

Table of Contents

Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
Enter your login credentials in the fields provided. The default password is admin.
To know if you have successfully logged in to the web interface, the screen below should appear.

How do I access my Linksys WRT54G?

WRT54G default login and other support information For all versions of the Linksys WRT54G router, the default password is admin. The password is case sensitive, so it must be written exactly like that. The default IP address is 192.168. 1.1.

How do I reset my Linksys WRT54G2 router password?

Here’s how:

Power on the WRT54G2 router.
Turn the router around so you have access to the back, where the cables are connected.
With something small and sharp like a paperclip or pin, press and hold the Reset button for at least five seconds.
After releasing the button, wait 30 seconds for the router to reset.

How do I configure my Cisco Linksys WRT54G2 v1?

First you connect to your Linksys router. Then go to http://192.168.1.1 and type in “admin’ as your password in to log in window and click “log in’. then go to the “wireless’ tab and enter your wireless network name. In the wireless channel select ’11 2.462GHz’ and click save.

What is Linksys admin login?

The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.

How do I configure my Cisco Linksys router?

Configuration for Linksys routers: E1200, E1500, E2500, E3200, E4200, WRT160n

Access the router’s browser-based utility. Log into your router’s browser-based utility by entering 192.168.
Go to the “Setup” menu. Click on the “Setup” tab.
Go to the “Basic Setup” page.
Enter the first DNS resolver.
Save your settings.

How do I reset the password on my Linksys Wireless G Broadband router?

Reset Button

Press the reset button for 30 seconds.
Open up your Web browser and enter “192.168. 1.1” in the address bar.
For the login, leave a blank ID and enter “admin” as the password.