Pfeiffertheface.com

Discover the world with our lifehacks

How do I fix my Canon printer error code 5b00?

How do I fix my Canon printer error code 5b00?

What can I do if I get the Canon printer error 5b00?

  1. Reset the waste ink counter. Firstly, unplug the power and the USB cables from the printer.
  2. Manually clean the waste ink pad. Open the ink cartridge compartment.
  3. Other potential solutions. If the print head is not clean, this can often lead to this error.

How do I reset my canon mx320 printer?

Reset setting Press the button repeatedly until [Device Settings] appears. Press the left or right arrow to select [Reset setting], then press the button. Press the left or right arrow to select one of the below options and then press . Reverts the telephone number settings to default.

How do I clear the error code on my Canon printer?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

How do I reset my Canon ink absorber full?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

How do I get my printer out of an error state?

How to Fix the “Printer in Error State” in Windows 10

  1. Ensure the Printer Is Properly Connected to Your PC. The first thing to verify is your printer’s connection with your PC.
  2. Reboot the Printer.
  3. Verify the Paper and Cartridge Ink Levels.
  4. Reinstall the Printer Drivers.
  5. Automate the Print Spooler Service.
  6. Update Windows 10.

How do I clean my Canon ink absorber?

  1. Take a bowl with warm water and add some soapy material.
  2. Open the ink cartridge compartment.
  3. wait for ink cartridges and disconnect the printers power cord.
  4. Look balck rubber frame under the ink cartridge.
  5. pull the rubber frame out of the printer and remove ink absorber pads.
  6. clean the pads in the bowl.

Can you replace ink absorber on a Canon printer?

In order to maintain the best printing, the ink used when Cleaning is absorbed into the ink absorber inside the printer. The ink absorber requires the replacement when it is full. However, it cannot be replaced by yourself.

What happens if ink absorber is full?

The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.