How do I find the model of my Price Pfister faucet?

Let’s start by identifying your faucet. If you still have your packaging or instruction manual, the product model number (usually an 8 digit code, i.e. F-529-7AYY) is displayed on the product package and on the instruction manual right below the product name.

Table of Contents

How do you remove the handle on a Price Pfister kitchen faucet?

Remove Handle You’ll need to find the set screw (most times it’s directly under the handle) and use a 3/32 allen wrench to remove it by turning counter-clockwise until it comes out (save for later). Occasionally the set screw hole is covered by a plug, which you can pop off with a small flat head screwdriver.

How do I fix a leaky Pfister faucet?

Remove Cartridge. Let’s start by going under your countertop and turning off the water to your faucet at the angle stops.
Clean Gaskets then Re-install the Cartridge. Using a soft damp cloth, wipe down the cartridge gaskets to remove any debris.
Test for Leak. Turn your water back on and check if the dripping has stopped.

How do you remove a screwless faucet handle?

Once you find the necessary tools, you’ll need to follow these steps to remove the screwless faucet handle successfully.

Step 1: Turn off the water.
Step 2: Remove the cap on top of your faucet.
Step 3: Remove the hidden set crew.
Step 4: Remove the faucet handle.
Step 5: Rinse off mineral deposits.

Does Price Pfister have a lifetime warranty?

Price-Pfister pioneered the lifetime limited warranty that has now become the North American standard, adopted by virtually all domestic companies and many imported faucets. Its Pforever Warranty has changed little since its introduction. Its promise is very simple. Pfister will provide the parts required to repair a defective Pfister faucet.

How to rebuild a Price Pfister faucet?

Small flat-head screwdriver

Phillips screwdriver

Channel-lock pliers

Rag (as needed)

Penetrating oil (as needed)

Plumber’s grease

Replacement cartridge (as needed)

How to remove a Price Pfister faucet?

Turn off the hot and cold shutoff valves and open the faucet to relieve pressure.

Disconnect the faucet supply hoses from the shutoff valves by unscrewing the connectors with locking pliers or a wrench.

Uncouple the hoses connecting the spout and sprayer to the faucet diverter.

Where is the model number on Price Pfister?

The first thing to know about kitchen hole patterns is that many different faucet types can fit the same one.

The most common kitchen hole preparation is a 3-hole pattern,where the left and right holes are 8″ apart.

4 hole configurations often exist to accommodate an accessory,like a sidespray,soap pump or air gap.