How do I contact Morel lifters?
Morel Lifters / John Callies Inc
- www.johncalliesinc.com.
- +1 216 671 5400.
Where are Morel lifters made?
USA made
Morel is committed to producing the best in high performance lifters and parts in the aftermarket industry. All products are USA made.
Are Johnson lifters good?
They offer quiet, trouble free operation with reduced friction and valvetrain stress, but they are not however, without their own unique quirks that require innovative solutions. That’s where Johnson Lifters shines brightest. They identify and solve common lifter problems to ensure optimum performance and reliability.
How can you tell the difference between a hydraulic and solid lifter?
For this discussion, a solid lifter is as its name implies: one piece of metal. It can be considered just a means to transfer camshaft lobe action to the pushrod. In contrast, a hydraulic lifter is hollow and has an internal piston and spring, and it allows oil to enter and exit.
Where are Johnson lifters made?
Best quality lifters in the world. Made in the U.S.A.. Out performs all competitors.
How do you adjust Morel lifters?
Adjusting the Zero-lash setting of the lifter: Adjust the rocker until the push rod just starts to get tight while taking the pushrod and rolling it between your thumb and finger. Once you feel drag, this is what we call Zero-lash.
Who makes lifters for GM?
Johnson Lifters®
The Johnson Lifters® name has been known within the industry for over 60 years. In 1954 Johnson began producing millions of lifters for General Motors and thus laid the foundation for a credible name in the market.
Who makes GM Performance lifters?
Chevrolet Performance hydraulic roller lifters are designed as direct replacements for your engine. These lifters were designed for use by GM to be used in performance engine builds and incorporate improved valving to allow higher rpm capability- what more can you ask for? 49 Reviews.
Can you replace solid lifters with hydraulic lifters?
It is possible to run hydraulic flat-tappet lifters on a solid flat-tappet cam, and hydraulic roller lifters on a mechanical roller cam. The rules in some racing classes restrict competitors to running hydraulic valve lifters.
How do you set the preload on a hydraulic lifter?
To set the lifter preload, turn the engine in its normal direction of rotation until the exhaust lifter just starts to travel upwards. 2. Adjust the intake valve to zero lash and then turn the rocker arm adjustment nut 1/4 to 1 turn. This additional turning of the adjustment nut sets the lifter preload.