How do I connect my D-Link wireless router to my mobile?

Step 1: Launch the D-Link Wi-Fi app.

Table of Contents

Step 2: Tap the 3 horizontal lines in the upper left corner and tap Install Your Device.
Step 3: Scroll through the list and tap DIR-867.
Step 4: Follow the installation steps to connect the router to your modem and power on.

How do I setup my d-link wireless router?

Setting up a D-Link Router

Open the router in a new browser tab. Open your browser and navigate to http://192.168.0.1, the default IP address of the D-Link router.
Enter the D-Link router password.
Setup a strong password.
Select your Timezone.
Configure your internet connection.

How do I connect my 4G dongle to my Dlink router?

Step 1: Open your Internet browser and enter http://dlinkrouter, http://dlinkrouter.local, or http://192.168.1.1 into the address bar. – Password field should Admin. Click Login. Step 3: Click the Setup tab at the top of the page and then click 3G/4G Setup from the menu on the left-hand side.

What is wireless router mode with 3G 4G backup?

In Wireless Router mode, you can use a 3G/4G network as a backup solution for internet access. When 3G/4G Backup enabled, your router will connect to the 3G/4G network when the original network service fails.

Why is my D-Link router not connecting to the Internet?

– Power Off your Internet Modem (Not the D-Link Router) for 20 seconds and then power it back on. Wait up to 2 minutes and check the Network Status again. If the status changes to Connected, your internet should be working. If still disconnected, process to the next step.

How do I connect my 3G USB modem to my wireless router?

How to configure Data card/USB dongle as a Wifi Router

Connect the 3G dongle in USB slot.
Connect the router with LAN wire that you get with the router.
You can see router configuration page and specify your ISP provider (example: Tata photon)
Enter required fields and set a password.

How do I connect my D Link modem to my laptop?

Step 1: Connect the included power adapter to a wall socket and your router.
Step 2: Connect the Ethernet cable to the WAN (or internet) port of both your modem and router, connecting the two. (
Step 3: Give it a moment to start up with a light indication.
Step 4: Head to your computer or mobile device.

What is 3G 4G mode?

Introduction. A mobile broadband modem, also known as 3G/4G modem, is a type of modem that allows a device (such as: laptop, personal computer, router, media player etc.) to receive Internet access via a mobile broadband connection.

What is wireless router mode?

1. Wireless router mode (Default) : In wireless router/ IP sharing mode, router connects to the Internet via PPPoE, DHCP, PPTP, L2TP, or Static IP and shares the wireless network to LAN clients or devices. In this mode, NAT, firewall, and DHCP server are enabled by default.

What devices can be connected to a D-Link router?

It is also backwards compatible with earlier 802.11g and 802.11b standards meaning that just about any WiFi enabled device can connect to the tiny D-Link router. And do so securely, thanks to the usual support for data encryption to ensure that only users with the necessary authorisation can get on.

How do I connect my D-Link laptop to a 3G network?

It’s not difficult, especially if you use D-Link’s Mini 3G USB Router ( DWR-510 ), which simply plugs into your laptop to both connect to a 3G data network and share that connection over a fast and secure WiFi network.

What is the Mini 3G USB router?

Looking much like a highly portable 3G dongle with no external antennae and a neat fold-away USB connector, the Mini 3G USB Router can be used to connect a single laptop to the Internet. All that’s needed is a data SIM card, from any network operator, in any country, on either a pay-monthly or pay-as-you-go contract.

How do I turn a 3G modem into a WiFi router?

Simply flick the switch located on the side of the router and it turns itself from a standalone 3G modem into a WiFi router, much like those used to share home broadband services.