Can you turbo a non turbo RX-7 FC?
Preface. The question 99% of new RX-7 owners ask themselves after they have purchased a naturally aspirated (non-turbo) car is “can I turbocharge it?”. The commonly accepted answer is “no”. This is normally followed by advice to either buy a Turbo II, or swap in the drivetrain from the Turbo II.
Are RX-7 FC turbo?
This was powered by the 13B rotary engine, offered in naturally aspirated or turbocharged forms….Second generation (FC3S)
| Second generation (FC) | |
|---|---|
| Platform | Mazda FC |
| Powertrain | |
| Engine | 1308 cc 13B twin-rotor 1308 cc 13B-T turbo twin-rotor |
| Transmission | 5-speed manual 4-speed automatic |
Can you put a supercharger in a RX-7?
Camden Supercharger Kit Fits 79-92 Mazda Rx7s. Creates 9-11 psi. The Camden Supercharger System utilizes a roots type supercharger developed specifically for automotive engine applications. The present supercharger design has evolved from the first Camden Supercharger built in 1956.
How much HP can you get out of a 13B?
After all, displacing only 1.3 liters yet producing output on the order of 255 hp (the factory rating for a stock 13B-REW engine) and up to the 550 whp of Jonny’s half bridgeported engine, the argument is compelling.
How much HP does a FC RX-7 make?
MAZDA RX-7 (FC) 2.4L 5MT (185 HP)
How many RX-7 are left?
| 2021 | 2019 | |
|---|---|---|
| MAZDA RX-7 RS | 2 | 5 |
| MAZDA RX7 | 182 | 197 |
| MAZDA RX7 2 | 52 | 56 |
| MAZDA RX7 TURBO | 52 | 67 |
Can you supercharge a 13B?
You can run our superchargers on either the 12A or the 13B.
How much HP can a 2 rotor make?
40 hp
Applications and Horsepower Range of the Basic Rotapower Engines
| Max. Horsepower | Engine Displacement | Rotor Configuration |
|---|---|---|
| 2.5 hp | 27 cc | 1 Rotor |
| 20 hp | 150 cc | 1 Rotor |
| 40 hp | 300 cc* | 2 Rotors (2×150 cc) |
| 60 hp | 530 cc | 1 Rotor |
What does 13B-Rew stand for?
13B-REW denotes a twin turbo 13B…. either FD or Jspec Cosmo. I agree, REW stood for twin turbo. RE stood for rotary engine and appeared on the badges of early rotary cars such as the RX-2. It was sometimes added to the 13B engine designation when it came out in the RX-4.
Are 13B rotary engines reliable?
The 13B-REW is not a reliable engine if it is not properly taken care of. While the 13B gets a bad reputation for reliability, it is often caused by negligent owners. However with that being said, the 13B REW does have a number of common problems of its own that tend to occur regardless of maintenance.
How much HP does a 1987 RX-7 have?
The FC RX-7 is powered by Mazda’s famous 13B twin-rotor engine, which made 160 hp in 1987.
Does the Mazda RX7 have a twin turbo?
We have been able to develop impressive performance with a properly tuned, twin turbo RX7. We’ve even seen 11 second times at the track. As many are aware, Mazda continued producing the RX-7 and developing the platform until 2002.
How much RWHp will my RX-7 produce with this setup?
This setup produces an easy 400+ RWHP at 15psi on race gas and with proper tuning and more boost, is capable of propelling your RX-7 into the 10’s. We’ve produced over 500 RWHP using this exact turbo setup out of the box.
What is included in the turbo kit?
The kit comes complete with top quality parts, stainless manifold, wastegate, air filter, it also includes all necessary hardware and instructions. Turbo only shown. Click the image to the right to start a slide show depicting the whole kit.
Are Mazda sequential twin turbos better?
Whether you’re replacing your turbos due to old age or feel the “need for speed ” , there is no better value than the Mazda sequential twins. The SP version of the Efini twin turbo set is similar to the original except for the upgraded compressor side of the turbos.