Discover the world with our lifehacks

Can you set depth on Mantis Tiller?

Can you set depth on Mantis Tiller?

With The Mantis Tiller/Cultivator you can till up to 10″ deep. You’ll have better soil. And better soil is the foundation of better gardening.

How can I tell what model my Mantis tiller is?

The model number on a Mantis tiller can be found on a white label, located on top of the engine housing. The model number will be located at the bottom of the label in the “Item#” field.

What engine is on Mantis tiller?

Honda® 4-cycle engine
Powered by an easy starting Honda® 4-cycle engine and combined with specially designed tines, this tiller matches the performance of a big, front-tine tiller but is easier to use! Breaks through sod, compacted soil and hard clay.

What is the biggest Mantis tiller?

Our Widest, Most Powerful 4-Cycle Tiller Ever. This extra-wide rototiller is built for bigger yards and gardens, and features our unique, curvy tines that easily break through new ground and sod, compacted soil… even hard clay.

Where are Mantis Tillers made?

Built In Pennsylvania Mantis tillers are proudly assembled in Pennsylvania with components manufactured both in the United States and abroad.

What spark plug does a Mantis Tiller use?

NGK Spark Plug (BPM8Y). The spark plug ignites the fuel and air mixture in the engine’s cylinder to power the engine.

Are electric cultivators any good?

Electric tillers are an invaluable garden tool, saving you hours of hard work, sweat, and backache. Unlike gas-powered rivals, they’re easy to start, very manageable, and most are a lot more affordable.

How do you start a mantis Tiller?

– Turn off the tiller. – Remove the retaining pins from both tines and slide them off the axle to access the worm gear housing. – Remove the four screws from the cover plate on the worm gear housing with a Phillips screwdriver. – Fill the housing with lithium #0 grease almost completely to the top, but avoid overfilling.

How to adjust the throttle cable on a mantis Tiller?

Take out the tine retaining pins and remove the tines from the axle before working on the engine.

  • Unscrew the wing nut in the center of the air cleaner cover on the left side of the tiller engine as you look at it from the front of
  • Remove the air cleaner cover.
  • Locate the triangular metal piece at the end of the throttle cable.
  • How to assemble mantis Tiller?

    Park the Mantis tiller on a level surface and remove the spark plug wire from the spark plug tip for safety.

  • Remove the wing nut that holds the air filter housing cover in place and remove the housing cover.
  • Grip the lower fuel line between the carburetor and gas tank with a pair of pliers.
  • How to troubleshoot a mantis Tiller?

    In Storage Too Long. The fuel tank and carburetor of a Mantis tiller that has been in storage may require emptying and cleaning before the engine will start.

  • Clogged Fuel Lines or Dirty Spark Plug. If your Mantis tiller will not start,ensure that the On/Off switch is on.
  • Problems With Fuel.