What sizes do concrete tubes come in?
QUIKRETE® QUIK-TUBES® are available in 4′ (1.2 M) lengths with 8″ (203 mm), 10″ (254 mm) or 12″ (305 mm) diameters. Also available regionally in 10-foot (3 M) and 12-foot (3.7 M) lengths.
What diameters do Sonotubes come in?
Forms are available in diameters ranging from 6″ to 36.” For diameters larger than 36,” Sonotube Commerical is available.
How many bags of concrete do I need for a 18 inch sonotube?
9 bags
Q:How many bags (60 or 80 lbs) needed to fill your 18″ dia tube 3′ long? A: Each 80-lb bag of QUIKRETE® Concrete Mix yields approximately 0.6 cubic feet, filling an 18” diameter building form 9 bags (of 80-lb each) will be required.
How much do sono tubes cost?
Sonotube 16″ x 4′ Removable Concrete Forming Tube at Menards
| Everyday Low Price | $18.48 |
|---|---|
| 11% Mail-In Rebate Good Through 6/12/22 | $2.03 |
What is the largest size sonotube?
Available in standard diameters from 12″ to 48″ in standard lengths of 12′ and 20′. Multiple sections can easily be spliced together for longer lengths. Custom lengths also available. For the most demanding applications, choose Sonotube commercial concrete forms.
Do you need a footing under a sonotube?
Once adjustments have been made, your Sonotube should stand evenly on its own. However, if you are using an in-ground footing, your tube should sit evenly on top of it. In theory, your Sonotube should stay in place on its own.
What can I use instead of sonotube?
Foundations screw piles
Pro Post Foundations screw piles in return, should be considered as your best alternative to concrete sonotubes.
Do I need rebar in sonotube?
We usually recommend that a minimum of two pieces of #4 rebar be placed vertically in an 8-inch-diameter concrete pier supporting a structure. A larger-diameter pier should have four or more pieces of vertical rebar.
How do I order a sonotube?
Sonotube Concrete Forms Call us at 888-766-8823 to get started.
Why are Sonotubes different sizes?
Each manufacturer produces Sonotubes® of different sizes but offers custom designs to accommodate customer requirements. All of the various types of Sonotubes® are designed for commercial construction use. The many different sizes provide capabilities that assist in increasing the efficiency of a construction project.
Do you put rebar in sonotube?
When setting vertical rebar in a sonotube, use a plastic spacer in the center of the sonotube on the bottom. Place the sonotube over the plastic spacer, then insert the rebar on top of the spacer. Once done, you can use rebar wire and punch small holes through the sonotube on top to hold the rebar centered.
Do Sonotubes need footings?
However, if you are using an in-ground footing, your tube should sit evenly on top of it. In theory, your Sonotube should stay in place on its own. However, you may find it necessary to add some wood supports to prevent it from moving about throughout the process.