What is the difference between Hilti HY 200 A and HY 200-r?
Hilti HIT-HY 200-A will have shorter working times and curing times than Hilti HIT-HY 200-R. The user can select product gel time suitability based on temperature of the base material and jobsite time requirements. The packaging for each is different which helps the user distinguish between the two adhesives.
What is the strongest Hilti epoxy?
Hilti HIT-RE 500 V3 has the highest bond strength on the market—60 percent higher than Hilti HIT-RE 500-SD technology (the previous market leader).
Can you use Hilti epoxy in the rain?
Hilti Verified Yes, a wet hole can affect the performance of post-installed adhesive anchors.
What is the difference between Hilti 200 and 500?
HIT-RE 500 V3 is an epoxy with a slow cure time and HIT-HY 200 is a hybrid acrylic based adhesive with a fast cure time.
Will Hilti epoxy set up in water?
Hilti Verified Hilti’s HIT-RE 500 V3 adhesive anchor system has approvals for submerged (underwater) conditions, however, HIT-HY 200 does not. Therefore, you might want to consider using HIT-RE 500 V3 for your application.
How long does Hilti epoxy take to cure?
Saves You Time and Money on the Job Site
| BASE MATERIAL (F°/C°) | GEL TIME | FULL CURE TIME |
|---|---|---|
| 90°/32° | 2.5 minutes | 45minutes |
| 70°/21° | 5 minutes | 45 minutes |
| 50°/10° | 16 minutes | 90minutes |
| 32°/0° | 35 minutes | 4hours |
What is an adhesive anchor?
An adhesive anchor system is a type of post-installed fastening for attachment of metal to concrete or masonry base material, or new concrete to existing concrete.
Does Hilti epoxy expire?
Hilti Verified The shelf life, as indicated by the expiration date, applies to an unopened foil pack stored in a cool, dry, and dark environment and assumes that the product is installed in accordance with the instructions for use. Hilti does not recommend use of adhesive anchor systems after the expiration date.
What is the strongest anchoring epoxy?
ULTRABOND® HS-1CC
ULTRABOND® HS-1CC is the world’s first anchoring epoxy for cracked and un cracked concrete, formulated to be IBC compliant in both bulk and cartridge delivery systems for use in dry, damp, water-filled and submerged holes, even in the most extreme temperature and load conditions.
How strong are epoxy anchors?
A 5/8” diameter threaded rod in a 3/4″ diameter hole embedded to a 5-5/8” depth and cured at 75 °F for 24 hours in 3,500 psi concrete will yield an ultimate pullout strength of 28,000 lbf (124 kN). At the minimum load time of 4 hours in the same conditions the ultimate pullout strength is 7,000 lbf (31 kN).
Why is my epoxy hardener yellow?
This yellowing is due to oxidation, a reaction with oxygen in the air which causes the amines in the hardener to discolor. As air exposure continues, this color will deepen over time, much in the way an apple or avocado will brown, once cut and exposed to air.
How strong is Hilti hit-Hy 200 adhesive?
Table 19 – Hilti HIT-HY 200 adhesive design strength with concrete / bond failure for rebar in uncracked concrete 1,2,3,4,5,6,7,8,9 Rebar size Effective embedment in . (mm) Tension — ϕN n Shear — ϕV n ƒ´ c = 2,500 psi (17 .2 MPa) lb (kN) ƒ´ c = 3,000 psi (20 .7 MPa) lb (kN) ƒ´ c = 4,000 psi (27 .6 MPa) lb (kN) ƒ´ c
What is table 88-Hilti hit-Hy 200?
Table 88 – Hilti HIT-HY 200 adhesive factored resistance with concrete/bond failure for Hilti HIS-N and HIS-RN internally threaded inserts in cracked concrete1,2,3,4,5,6,7,8,9 Thread size Effective embedment in . (mm) Tension – N r Shear – V
What are the explosive and oxidising properties of a HitHit-Hy 200R?
HIT-HY 200-R, B Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/07/2020 EN (English) 9/23 Explosive limits No data available Explosive properties Product is not explosive. Oxidising properties No data available 9.2. Other information SADT 65 °C
What is the product name and product code for hit-Hy 200-R?
Product name HIT-HY 200-R Product code BU Anchor 1.2 Details of the supplier of the Safety information for 2-Component-products Hilti, Inc. Legacy Tower, Suite 1000 7250 Dallas Parkway TX 75024 Plano – USA T +1 9724035800 1-800-879-8000 toll free – F +1 918 254 0522 SECTION 2: General information