What is tent pole strategy?
Tentpole marketing is a strategy devised by most artists, movies, and media production companies to seize the hype created around an event – a trend, or a moment in a manner that benefits them. The concept of tentpole marketing is similar beyond the movie industry as well.
What is a tent pole activation?
Tentpole marketing is about centring your promotional activities around big events. The term was first coined in Hollywood to describe the hype surrounding popular movies, as interest levels peak over opening weekend.
How do I know what size tent pole I need?
Check your tape measure, the smallest number of mm you can see will be the size above what you need (e.g. if you can see 9mm, but not 8mm – your pole will be 8.5mm diameter). For the very small sizes of pole less than 7.9mm replacement sections are not stocked. These will need to ordered from the tent manufacturer.
What is a tentpole episode?
In broadcast programming and motion pictures, a tent-pole or tentpole is a program or film that supports the financial performance of a film studio or television network. It is an analogy for the way a strong central pole provides a stable structure to a tent.
Can you shorten a tent pole?
To shorten existing shock cords, pull (carefully, using an extra strong grip plier) the aluminum end caps off each pole. Holding onto the slack cord, pull it until it’s taught (on the open end), keeping all the pole segments together. Cut the cord and tie a small knot.
How long should a shock cord be on a tent pole?
You will need 1/8” thick shock cord and about 1-2 ft. longer than the length of the entire pole for each pole (if you have a 10ft pole get about 12ft, some say a ¾ 1. ratio might be better). Remove the end tip, and the shock cord will be tied in a knot (either on a washer or on the end tip of the pole).
How do you measure wall tent angles?
Measure A, WALL HEIGHT, from where roof meets the wall to the ” bottom” of the wall canvas. Deduct 1″ from the A (wall height) dimensions for angle itself taking 1″ of wall height. Deduct leg length 1% for shrinkage on new tents.
How do you cut a Fibreglass pole?
Put on your safety glasses. Place one hand on the fiberglass stick, close to the pencil mark you placed on the masking tape in Step 3. Align the back edge of the fine-toothed hacksaw blade with the pencil mark. Slowly pull the hacksaw toward you and then away from you to cut into the fiberglass stick.
How to make tent poles?
To make tent poles, first, you will need to get yourself stainless steel conduits. These conduits are hollow inside, lightweight, and fairly cheap for the purpose. As the poles will be replacing previous ones, you will mark them slightly longer than the original pole and use a saw tool to cut it.
What are the best tent poles for pitching?
Fiberglass tent poles are among the most popular choices as they are inexpensive compared to other poles. While these poles offer increased bendability, pitching larger tents is near impossible as the slightest wind can deform the poles with the weight of the fabric.
How do you make a shock cord pole?
To make your poles with a shock cord, you will need either hollow aluminum or carbon fiber, whichever material you prefer. You can use a saw or pipe cutter to trim the pole according to your desired pole length. Now select your desired end tip and attach it to one end of the shock cord by making a knot and gently push it through the poles.