How do I connect a parallel printer to a USB port?

Windows recognizes the printer using the adapter cable.

Table of Contents

Plug the printer’s power cord into an outlet, but keep the printer turned off.
Plug the parallel connector of the parallel-to-USB adapter cable into the parallel port on the printer.
Plug the USB connector into a free USB port on the computer.
Turn on the computer.

How do I redirect a LPT1 to USB printer in Windows 7?

Click the “Start” button, then “Control Panel” and “Printers.” Right-click the USB printer and click “Sharing.” Click the button next to “Shared as” to view the shared name of the printer. If no name has been entered, enter a short name without spaces. Note this name for the following steps.

How do I add a parallel printer port in Windows 7?

Click the Hardware tab, and then click Device Manager. Click to expand Ports, right-click Printer Port (LPT1), and then click Properties. If have more than one printer port installed on your computer, click LPT2 or LPT3. Click the Port Settings tab, click Enable legacy Plug and Play detection, and then click OK.

Do USB to parallel adapters work?

Parallel-to-USB adapter work best with older computers that run DOS applications that don’t use the Windows Print Spooler to process print jobs. Parallel-to-USB adapters usually require an external power supply to function properly, and do not support high-speed USB connections.

Is USB a parallel port?

Unlike a parallel port, which can connect one device at a time, USB ports can support additional devices with an external USB hub. A USB hub is plugged into a USB port on the computer and provides additional USB ports.

Can you connect a parallel printer to a serial port?

Your adapter allows you to plug a cable with a 25-pin serial connector into the 9-pin connectors PCs use for serial ports, but the signals on the pins of a parallel port are completely different, so it cannot work and could have caused damage to the electronics on one end or the other.

Where is LPT1 port on my computer?

The LPT port or parallel port is found on the back of the computer and is part of the motherboard. Most of today’s computers are eliminating the parallel port in favor of USB ports.

How do I connect a USB printer to a serial port?

Connect a USB printer cable to your USB printer and connect the other end to a USB female-to-female adapter.
Insert the USB end of a USB-to-serial adapter to the female-to-female USB adapter.
Plug the serial end of the USB-to-serial adapter into the serial port on your computer.
Turn on the printer.

How do I find my parallel port in Windows 7?

Open Control Panel,click System and Security their click Device manager,then from the Tree View(List) select or expand Ports(COM & LPT) from their right click on Printer port i.e any of the LPT port(normally “LPT1”) and select Properties from their select Resource tab. Their you will find the I/O address.

How do I connect a parallel port?

Connect cables Begin first by connecting the parallel data cable to the back of the printer. Once connected, follow that cable to the back of the computer and connect it to the parallel port. When connecting the printer be careful not to disconnect any other cables.

What is USB parallel?

Now let us understand what is USB to parallel adapters is USB-to-parallel adapters are printer connection cables that have a normal and printer cablestandard rectangular USB plug. This is at one end and on the other end there is a plug.

How do I connect my parallel port to my laptop?

1. Connect the printer’s original parallel cable by inserting the large plug into the printer’s parallel port and clipping the wire springs inward so that it holds the plug in place. The connector will only go in the correct way and, although it is a tight connection, you should not need to force it.

Wie verbinde ich einen Parallel-Drucker mit einem anderen Gerät?

Parallel-Drucker am USB-Port. Mit einem Rechtsklick auf den Druckernamen gelangen Sie zu seinen “Eigenschaften”. Wählen Sie das Register “Anschlüsse”, und suchen Sie einen freien USB-Port. Setzen Sie dort ein Häkchen und klicken Sie auf “OK”. Bei Vista kommen Sie über “Systemsteuerung” und “Drucker” zu Ihrem Gerät.

Wie verbinde ich einen Drucker mit einem PC?

Schließen Sie das Kabel am Drucker und am PC an. Schalten Sie den Drucker ein, und fahren Sie den PC hoch. Der Rechner erkennt den Drucker in der Regel als LPT1-Gerät (Line Print Terminal) und installiert den Treiber. Nun müssen Sie den richtigen Anschluss zuordnen. Unter XP gehen Sie auf “Start, Einstellungen, Drucker und Faxgeräte”.

Wie installiere ich einen Drucker auf meinem PC?

Wie kann ich meinen Drucker weiterverwenden?

Sie können Ihren Drucker weiterverwenden, wenn Sie ein Parallel-auf-USB-Druckerkabel einsetzen (rund 20 Euro). Schließen Sie das Kabel am Drucker und am PC an. Schalten Sie den Drucker ein, und fahren Sie den PC hoch.