Can cedar tongue and groove be used outside?
For interior, as well as exterior use, Western Red Cedar tongue and groove (T&G) paneling can be installed vertically, horizontally, or diagonally. It is commonly used as an exterior siding and cladding, in soffits and for ceilings, and either interior or exterior accent walls or paneling.
What is VJ cedar?
SHIPLAP CEDAR PANELS. VJ (V-Joint) board is a classic profile with origins dating back almost as far as timber construction itself. A mainstay in traditional colonial homes, VJ panelling has enjoyed a renaissance, becoming a popular choice in many modern, architecturally-designed homes and commercial spaces.
How thick is cedar tongue and groove?
Pattern Stock Cedar Tongue and Groove Board (Common: 1 in. x 6 in. x 12 ft.; Actual: 0.625 in.
How much is tongue and groove cedar per square foot?
Volume discounts on large orders
| PRIMED/PAINTED SMOOTH FACE | CEDAR GRADE | SQFT PRICE PRIMED |
|---|---|---|
| 1×6 All T&G Profiles | CLEAR FJ | CALL/EMAIL FOR PRICING |
| 1×8 All T&G Profiles | CLEAR FJ | CALL/EMAIL FOR PRICING |
How deep should a tongue and groove joint be?
The groove should ALWAYS be slightly deeper than the tongue is long, by as much as 1/16″ for 3-inch wide boards. The reason for this is two-fold.
Can I use cedar for flooring?
Cedar Wood Flooring Gives Your Home a Classic & Traditional Feel. Cedar is one of the most popular woods in North America. Some people choose cedar flooring because of the delicate fragrance it emits. Cedar has a very fine grain and is mostly a red-colored wood.
What kind of cedar do you use in a sauna?
Western Red Cedar wood
Western Red Cedar wood is almost everybody’s preferred choice for a sauna due to its appearance, stability, and warping resistance under heat and humidity, making it comfortable to sit.
Should I glue tongue and groove boards?
Don’t Glue Tongue and Grooves This is because wood flooring needs room to move as it expands. If the wood is glued both to the subfloor and between the planks, there’s no room for movement. In the long-run, limited movement leads to cracks, disfigurement and warping of your wood flooring.
Can I use a brad nailer for tongue and groove?
A finish nailer or brad nailer is the easiest and most efficient tool to use when installing your new shiplap or tongue and groove. They can be purchased/rented relatively cheaply from your local hardware store, they’re lightweight, and are simple enough that a 12 year old can use them!
Do you stain tongue and groove before or after installation?
Tongue-and groove-ceilings must be stained before installation for best results. If, however, the builder hung the roof without staining it first, finish the ceiling in the method suggested in the tips section. Then you’ll have to touch up the unstained portions of the tongue as they become exposed over time.