What is fir veneer?
Description. Douglas fir veneer, also known as vertical grain douglas fir wood veneer or vertical doug fir veneer is typically a pale yellow to a reddish golden light brown color. It is almost exclusively quarter cut (rift cut) to produce a tight vertical grain appearance with a mild pinstripe contrast.
What is Douglas fir plywood?
Plywood made from Douglas fir is a softwood plywood typically sold in 4-by-8 panels of varying thickness. Douglas fir is an evergreen common in many forested areas, and the plywood made from it is a common building product available in a range of grades and ratings for a variety of applications.
What is veneer in plywood?
In woodworking, veneer refers to thin slices of wood and sometimes bark, usually thinner than 3 mm (1/8 inch), that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of …
What is CVG Douglas fir?
Douglas Fir Wood (DF Wood) Clear Vertical Grain (CVG) is the top quality grade available. Dimensional Lumber. Available in various lengths (Linear Foot). Please include the desired length when submitting quotes online.
What is vertical grain plywood?
Species: Fir, Vertical Grain Pseudotsuga menziesii. Vertical Grain Douglas Fir is a resilient timber with a high strength to weight ratio. It has been widely used for various construction projects for centuries.
How strong is fir plywood?
A 12-by-36-inch piece of 3/4-inch fir plywood can easily support 50 pounds. However, a 12-by-36-inch piece of 1/4-inch thick plywood will not support that much weight. It will only support about 5 pounds before bending.
Is fir plywood a grade outside?
Exterior plywood is seldom pretty. It often has visible knots and blemishes, and most of it is made from readily available Douglas fir or southern pine — not expensive hardwood. However, it’s far more durable. Its layers are glued together with waterproof adhesive that prevents them from delaminating in wet weather.
What is better veneer or plywood?
Due to the structure of a plywood sheet, it is also resistant to warping, shrinkage, splitting and twisting, which can often occur with regular wood. Veneers are thin sheets of wood peeled from blocks of wood using a lathe or slicing machine.
Is veneer better than solid wood?
The way wood veneers are made gives them many advantages over traditional solid wood. Since just a thin slice of wood is used, veneers maximize the use of a single log, making them more environmentally-friendly and affordable. This also makes veneers less prone to warping and splitting.
What are the grades of Douglas Fir?
Available Board Grades
- cv – Clear Vertical Grain – This is the top quality grade available.
- d – D & Better – Appearance grade for paneling applications.
- sd – Select Deck.
Does Douglas Fir have knots?
Douglas fir is a product of nature, therefore, variations in grain and color exist. Checking and knots are also to be expected. A “Check” is a long crack that appears as the sapwood of a timber shrinks around the heartwood over time.
What is marine grade plywood?
Marine Grade Plywood is an exterior structural panel, sanded on both sides, most commonly made from Douglas fir or Pine. Other species of hardwood may also be used for marine plywood, usually in the Marine (boating) industry.
What is the thickness of vertical grain Doug fir plywood?
Vertical Grain Doug Fir Plywood comes in 4′ x 8′ Sheets available in 1/4 inch and 3/4 inch thickness. This Vertical Grain Doug Fir Plywood has coloring that is pale yellow to a reddish golden light brown. Need a Special Order!
What is the Best Face grade of plywood for furniture?
The number of defects such as pin knots or small burls varies according to the specie of veneer. This is the best face grade on plywood normally stocked and is often used for upper-end cabinetry, architectural millwork, and quality furniture. “B” face on hardwood plywood should be matched for a pleasing color, but not necessarily for grain.
What is reconstituted African veneer?
This African veneer is a sophisticated and elegant choice for interior environments. Reconstituted Veneer is rotary cut veneer created from fast-growing secondary species, then dyed, layered, laminated, and laid up with grain that replicates a natural species. It offers outstanding consistency in color and grain.
What is Grade A plywood used for?
An A face may allow slight mineral streak and/or vine marks. The number of defects such as pin knots or small burls varies according to the specie of veneer. This is the best face grade on plywood normally stocked and is often used for upper-end cabinetry, architectural millwork, and quality furniture.