What size does TimberTech fascia come in?
Specifications
| Finishes | Brown Oak, Rustic Elm, Silver Maple, and Stone Ash |
|---|---|
| Board Type | Solid Fascia Board |
| Edge Profiles Available | Square Edge |
| Length Available | 12 ft |
| Nominal Dimensions (width x thickness x length) | 12 in x 1/2 in x 12 ft |
How thick is TimberTech fascia?
9/16” thick
TimberTech Fascia Boards: For Fascia and Riser Installation, see Fastening Guidelines on page 4. Cedar and Grey • 12′ lengths – 9/16” thick by 12” wide. All TimberTech PRO and EDGE colors • 12′ lengths – 9/16” thick by 12” wide.
What do you use for deck fascia?
Azek – 1×10 white Azek is often the most popular choice for customers. Since Azek is 100% PVC, it can be easily attached to the rim joist with galvanized finish nails. Another option is to use two deck boards as fascia.
Can you use Trex fasteners on TimberTech?
Most hidden deck fasteners are compatible with the major decking brands like Trex, Timbertech or Azek. The benefit of grooving your own boards is that you can make the groove however you like.
What saw blade for TimberTech?
Use a miter saw with a fine-toothed, carbide-tipped finish trim blade (12” 100-tooth or 10” 90-tooth minimum).
What is the gap between TimberTech boards?
Spacing between boards should be 3/16″. The use of a spacer could add efficiency and help maintain proper spacing.
How do you install TimberTech fascia?
TimberTech Fascia Installation Tips. 1 Step 1: Choose the Right TOPLoc Fasteners for Your Build. TimberTech composite decking products are highly durable and require the use of high-quality 2 Step 2 – Option A: Install TimberTech AZEK Fascia Boards. 3 Step 2 – Option B: Install TimberTech PRO or EDGE Fascia Boards.
What drill bit do you use for composite fascia?
The TOPLoc Fascia Drill Bit is recommended for predrilling capped composite fascia boards from the TimberTech PRO and TimberTech EDGE collections. It can also be used with legacy uncapped composite boards, such as TwinFascia.
Do I need a TimberTech warranty for installing TimberTech Azek fascia?
TimberTech products are engineered the right way, to last. And many are covered by leading warranties. See full warranty details. Do I need this for installing TimberTech AZEK Fascia? No, it is not required for AZEK PVC fascia.
Do I need a fascia drill bit for Azek PVC fascia?
No, it is not required for AZEK PVC fascia. The TOPLoc Fascia Drill Bit is recommended for predrilling capped composite fascia boards from the TimberTech PRO and TimberTech EDGE collections. It can also be used with legacy uncapped composite boards, such as TwinFascia.
https://www.youtube.com/watch?v=FYGeKxV1cKY