What does VW 504 00 mean?
The VW 504 00 oil specification is for Audi VW gasoline engines with extended or long life service intervals (Confirm intervals with the vehicle manufacturer). The VW 504 00 oil specification is also known by VW as a Longlife III engine oil.
What is the equivalent of VW 502 00 oil?
VW 504 00
The standard VW 504 00 is again the successor standard of VW 502 00. If your car is approved for VW 502 00, you can also fill in oil with release VW 504 00 without hesitation.
What viscosity is VW 504 00 oil?
0w-30
Engine Oil Viscosity: 0w-30(5)
What does VW 505 00 mean?
VW 504 00 oils are suitable for engines meeting the demands of Euro IV emissions standards. VW 505.00. Passenger car diesel engine oil specification, minimum performance level CCMC PD-2.
What is the difference between VW 502 and 504?
504 is a lower SAPS version of 502, with some modernization. 504 starts with lower TBN so it’s possible that 502 does better with extended drain intervals.
What viscosity is VW 507 00?
LongLife oils meeting 504 00/507 00 are now SAE 5W-30 viscosity.
What oils meet VW specs?
VW/Audi
| Audi Oil Quality Std. | Manufacturer | Oil Type |
|---|---|---|
| VW 502.00 | Chevron | Havoline Ultra |
| VW 502.00 | Mobil | Mobil 1 |
| VW 502.00 | Pennzoil | Pennzoil Platinum European Formulation |
| VW 505.01 | Castrol | Edge Professional G E521671QDSP |
What do 502 and 504 status codes mean?
These two common HTTP status codes sound similar but their meanings are different. A 502 bad gateway means that the server acting as the gateway received an invalid response from the main server. A 504 gateway timeout means that the server acting as the gateway didn’t receive a response at all from the main server.
Does Castrol EDGE meet 507?
Castrol EDGE 5W-30 LL is approved for use in vehicles that require a VW 504 00 / 507 00, Porsche C30 or MB-Approval 229.31/ 229.51 5W-30 lubricant.
What type of oil is VW 508 00?
SAE 0W-20
Specifications 508 00 and 509 00 concern the so-called “VW Blue Oil” for the latest generations of engines from VW. The specifications demand an oil in viscosity class SAE 0W-20 with a reduced HTHS viscosity of at least 2.6 mPa. s. This allows fuel savings of at least 4% to be achieved.