How do I reset my Lexmark Imaging Unit?

How do I reset my Lexmark Imaging Unit?

Reset PC Counter

1. With the power on, open the front door.
2. Press and hold the cancel button (X). After a few seconds, the printer will flash its indicator lights telling you it’s resetting the life counter.
3. Close the front door.
4. The printer should restart automatically.
5. Enjoy your new imaging unit!

How do I reset my Lexmark printer to factory settings?

9.20. 6. How to reset to factory settings on Lexmark printers

1. Open the printer’s web page and Log in as Administrator.
2. On the menu select Settings.
3. Select Device.
4. Select Restore Factory Defaults.
5. Select Restore all settings.
6. Select Start.
7. Select Start.
8. Set date and time.

How to reset the photoconductor?

After installing the new photoconductor unit, make sure the printer is powered on and then open the front cover. With the front cover open, press and hold the stop/cancel (X) button. Once all the printer lights begin flashing or your LCD screen says “Resetting PC Counter,” let go of the button.

How do you reset the maintenance kit on a Lexmark ms811dn?

How To Reset The Maintenance Roller Kit On Lexmark MS810 MX810 MS811 MS811 MX710 MX812 MS812 More

1. Turn off the printer.
2. Enter the Configuration Menu.
3. Select Reset Roller Kit Counter from the Configuration Menu.
4. From the options displayed, select the roller kit to reset.
5. Select Yes to reset the roller kit counter value.

How do I change the kit on my Lexmark e360dn?

Replace the photoconductor kit

1. Replace the toner cartridge. Remove the toner cartridge from the box. Open the front cover. Remove the used toner cartridge. Shake and insert the new toner cartridge.
2. Replace the photoconductor kit. Open the front door. Remove the photoconductor kit. Unpack the new photoconductor kit.

How do I get my Lexmark printer to recognize my refilled cartridge?

How to Reset Lexmark Ink Cartridge Memory

1. Turn off the printer and unplug the power cord.
2. Wait approximately one minute to allow the ink cartridge memory to reset.
3. Plug the power cord back in and turn the printer on.
4. Check the ink levels to verify that they are correct.

How do I reset my Lexmark maintenance kit?

To reset the maintenance count perform the following procedure:

1. Turn off the printer.
2. Enter the Configuration Menu.
3. Select Reset Roller Kit Counter from the Configuration Menu.
4. From the options displayed, select the roller kit to reset.
5. Select Yes to reset the roller kit counter value.

What is a Lexmark maintenance kit?

The maintenance kit includes a fuser, MPF pick roller and separator pad, pick tires, separator roller assembly, and transfer roller. These parts may be individually ordered and replaced if necessary.

How do I reset my Lexmark toner chip?

How to Reset a Toner Chip for a Lexmark

1. Switch the printer off. Video of the Day.
2. Press and hold down the “Ready” and “Return” buttons on the printer.
3. Select “Maintenance Count.”
4. Select the option “Reset” for returning the chip’s toner level to zero.
5. Tip.