How do you make an O-ring groove in Solidworks?
Click Grooves (Toolbox toolbar) or Toolbox > Grooves . In the Grooves dialog box: To create an O-ring groove, click the O-Ring Grooves tab. To create a retaining-ring groove, click the Retaining Ring Grooves tab.
How do you calculate groove for O-ring?
Groove Design: O-Ring Seals for Static and Non-Rotary Dynamic Applications
- Calculate the O-Ring groove dimensions. Using the table above, determine the maximum recommended gland depth for your application.
- a. For a rod (shaft) seal:O-Ring Max Groove Diameter = Min Shaft Diameter + (2 x Recommended Gland Depth)
- b.
- c.
How do you make a groove in Solidworks?
To create a groove:
- Select a cylindrical face on a part where you want to place the groove.
- Click Grooves (Toolbox toolbar) or Toolbox > Grooves .
- In the Grooves dialog box:
- Select a standard, groove type, and available groove size from the lists on the top left of the tab.
- Click Create.
How deep should an O-ring groove be?
Cross Section & Groove Design Data
| Available Cross Sections for Encapsulated O-Rings & Groove Design Data | ||
|---|---|---|
| Inch | MM | Groove Depth |
| .063±.004 | 1.60±0.10 | .046 |
| .070±.004 | 1.78±0.10 | .049 |
| .079±.004 | 2.00±0.10 | .057 |
What is Toolbox in Solidworks?
SOLIDWORKS Toolbox is a library of fasteners and supplier standard components, fully integrated into SOLIDWORKS Professional and Premium. It provides easy access to your frequently used parts and the ability to customize to your companies standards.
What is O-ring groove?
Designing the parts of an application where o-rings will be applied is broadly termed “o-ring groove design”. In order to seal properly, the o-ring has to deform in the application by being compressed and stretched in any number of ways.
How much crush Should an O-ring have?
Compression should not exceed 3% of the O-ring diameter. Stretch for a smaller O-ring should not exceed 5%.
How far should an O-ring protrude?
To provide an effective seal, the O-ring’s inside diameter (I.D.) must be smaller than the piston groove diameter, so that the O-ring is slightly stretched, fitting snugly in the groove. This stretch should be between 1%-5% with 2% as the ideal in most applications. A stretch greater than 5% is not recommended.
How much does SOLIDWORKS Toolbox cost?
It will give you access to cloud-based 3D design tools including 3DEXPERIENCE SOLIDWORKS Professional, 3D Creator, and 3D Sculptor for just $99 per year.
Is SOLIDWORKS Toolbox free?
SOLIDWORKS Toolbox is included with SOLIDWORKS Professional and SOLIDWORKS Premium, the premium brand in affordable 3D CAD software. Only Toolbox allows you to take advantage of SOLIDWORKS Smart Part Technology, a unique capability that automates assembly tasks.
How do I create O-ring grooves in Revit?
The O-Ring Grooves tab lets you select and create standard O-ring grooves. Click Grooves (Toolbox toolbar) or Toolbox > Grooves. Select a groove from the lists in the top left corner. Displays a sketch of the selected groove type. Read-only properties for the selected groove. Describes the groove.
How do I use the O-ring grooves tab?
The O-Ring Grooves tab lets you select and create standard O-ring grooves. Click Grooves (Toolbox toolbar) or Toolbox > Grooves. Select a groove from the lists in the top left corner.
How do I use the grooves toolbox?
Click Grooves (Toolbox toolbar) or Toolbox > Grooves. Select a groove from the lists in the top left corner. Displays a sketch of the selected groove type.