How do I reprogram my Sears garage door keypad?

LIFTMASTER AND SEARS CRAFTSMAN WIRELESS KEYPADS

Table of Contents

Press and release the “smart” button on the garage door opener motor unit.
Within 30 seconds, enter a four-digit personal identification number (PIN) of your choice on the keypad.
Release the button when the garage door opener motor unit lights blink.

What garage door openers are compatible with Craftsman?

Sears Craftsman Garage Door Opener Keypads

Sears Craftsman 139.53403 Compatible 390 MHz Visor Remote Control 8 or 9 Dip Switch.
Sears Craftsman 139.53403 Compatible 390 MHz Mini Key Chain Remote Control 8 or 9 Dip Switch.
Sears Craftsman 139.53680 Compatible 390 MHz Security+ Mini Key Chain Remote Blue Button.

How do I know what series my Craftsman garage door opener is?

Finding the model number for the garage door opener To start, locate the model number for your Craftsman opener by looking on the opener label. If it starts with 139, you can use the corresponding LiftMaster part.

How do I program an old Craftsman garage door opener?

Follow these steps to program your old Craftsman garage door opener:

Step 1: Locate the mounted garage door opener.
Step 2: Locate the “Learn” button.
Step 3: Press “Top” button on remote.
Step 4: Press “SRT” button on garage door opener.
Step 5: Keep both the buttons pressed.
Step 6: Connect any additional remote controls.

Why is my Craftsman garage door keypad not working?

The most common cause of failure in a keyless entry is a depleted battery. If the battery has already been replaced the problem may be a failure with the keyless entry or the receiver logic board. Battery depleted Replace the battery. Most of the keyless entries use a 9-volt battery.

Will any garage door remote work?

In most cases, a universal remote should work with the most popular brands of openers on the market. The packaging will often provide information as to which brands and models it will work with. However, there may also be cases when a universal garage door remote will not work with a certain door.

What year is my Sears garage door opener?

This date is found on the control panel of the main power head hanging in the garage. Normally behind one of the light bulb covers.

What color Learn button is on my Craftsman garage door opener?

Ways to Help Verify the Learn Button Color and Radio Frequency

Color of Learn Button	Color of Antenna	Technology
Blue*	Gray	Security+ Rolling Code
Purple/Brown	Purple	Security+ Rolling Code
Yellow (round)	Yellow	Security+ 2.0
Yellow (round) with MC designator	Yellow	Security+ 2.0

Can you program an old garage door opener?

Whatever the reason, you can easily reprogram an old garage door opener. If you need to program a new remote that replaced a lost one, simply follow the same instructions above for programming new remotes.

How do you program a Craftsman garage door opener without a remote?

You can’t program a garage door opener without a remote controller. But you can use your remote transmitter to reset the garage door opener buttons inside your car. Or you can use an electronic keypad to control the door without a remote. For keypads, press the arrow buttons and the program buttons simultaneously.