What is a S480 Turbo?
The Borg Warner S480 FMW turbo has an 80MM inducer and utilizes the J-Type turbine wheels which out-flows and out-responds the previous 80mm/87mm wheel used. This high-flow model has compressor flow over 125 lbs per minute and is rated at 500 to 1,250 hp. Borg Warner Turbos S480 FMW Turbocharger (1000+HP) quantity.
What size Turbo is an S480?
Turbo Specifications: Compressor Wheel Inducer Diameter (mm): 80mm. Compressor Wheel Inducer Diameter (in): 3.16. Compressor Wheel Outer Diameter (in): 4.32. Turbine Wheel Outer Diameter (mm): 96mm.
How much does a S480 weigh?
Weight: 50.0 lbs.
What MM is a S400 Turbo?
Rated at 500 to 1050+HP High-flow S400 model, with compressor flow over 105 lb/min. Wheel Dimensions: Compressor: 74.7 mm inducer, 100.8mm exducer, with exclusive Extended Tip Technology. Turbine: 83mm inducer, 74mm exducer.
How much boost can a S475 make?
Run with the S475, the 6.0L produced 878 hp and 804 lb-ft of torque at a peak boost pressure of just 11.3 psi (meaning there was more left).
How big is a gt45 turbo?
| Turbine Size | ——- |
|---|---|
| * Trim: | 78 |
| * Inducer Diameter: | 88mm |
| * Exducer Diameter: | 77.5 mm |
| * A/R: | 1.05 |
How much power can a S480 Turbo make?
977 hp
The answer to that question can be found in the back pressure curves in graph 3, but know that the S480 turbo upgrade improved the peak power of the single-turbo 6.0L from 878 hp to 977 hp, with plenty left in reserve.
What size turbo is a GT45?
The cold side of DNA’s GT45 clone turbo featured a 0.66 A/R, a 69mm inducer, and a 98mm exducer. The hot side included an 88mm inducer, a 77.5mm exducer, and 1.05 A/R.
What is forced induction on a car?
Forced induction is the process of delivering compressed air to the intake of an internal combustion engine. A forced induction engine uses a gas compressor to increase the pressure, temperature and density of the air. An engine without forced induction is considered a naturally aspirated engine.
How big is a s464 Turbo?
Turbo Dimensions: 63.5mm Compressor Wheel. 83/74mm Turbine Wheel.
What size is a S300 Turbo?
BorgWarner SX-E S300 has three T4 turbine housings available for each turbine wheel size 76mm and 80mm: 0.88 Open Volute. 0.91 Twin Scroll.
How much boost does a s400 make?
Registered. Broaner said: s400’s can range from 550hp to 1200.