What format should stems be in?
The standard format for music stems is Stereo WAV 24 bit 44.1K. It is very common to see stems in AIFF format. Both have the same quality. Many people tend to record in 48K and even 96K but this is a matter of choice.
Is 16 bit or 24 bit audio better?
If you choose 24 bit audio then you have a more dynamic range than with 16 bit and you have less trouble with room noise. It also gives you more space before the audio signal starts to clip. This is the main reason that in the battle between 16 bit vs 24 bit audio, 24 bit is advisable.
Is 16 bit 44.1 kHz audio good enough?
A bit depth of 16-bit for a sample rate of 44.1kHz is enough to reproduce the audible frequency and dynamic range for the average person, which is why it became the standard CD format.
Should stems be mono or stereo?
stereo
First, make sure every stem is a stereo file. Even mono sources like a kick drum stem should be rendered as one stereo file even though the left and right sides will be identical. Next, make sure each file is consolidated to the exact same length.
What sample rate should I export stems at?
decide on a sample rate / bit depth (at least 44.1kHz/24-bit) and make sure all files (including vocals) are recorded and bounced out to these same specs.
Should stems be mastered?
But if you’re releasing a single and you’re not completely in love with the mix, stem mastering is the way to go. It allows the mastering engineer to fine-tune your mix with greater detail. It’s important to note that stem mastering should not be used to make up for a bad mix.
Is 24 or 32-bit better for audio?
The only real benefit of 32-bit audio is the added headroom when it comes to editing. While you get less distortion with 32-bit audio, you have enough headroom with 24-bit audio with room to spare. The differences between bit depths are inaudible and not really worth the hype.
What sample rate should I use for MP3?
44.1kHz
mp3 Basic Tips Use either 22.05kHz or 44.1kHz (44.1kHz is CD quality and recommended) sample rate. Other sample rates will playback in some players incorrectly, typically making you sound like one of the Chipmunks.
What’s better 44.1 kHz 48kHz?
First, 48 kHz allows for better sounding anti-aliasing filters than 44.1. Second, 48 kHz uses only slightly more disk space than 44.1. Third, videos usually require 48 kHz audio and much of our audio will be embedded in a YouTube or other video as part of distribution.
Should stems be in stereo?
All files must be in stereo – each bounced the same way through your stereo buss output. IMPORTANT! BE SURE YOU LEAVE YOUR COMPUTER AUTOMATION ON FOR EACH STEM SO THAT EVERY SONIC MOVE YOU MAKE IN YOUR STEREO MIX IS RETAINED IN THE STEMS.
What bit depth should I export stems?