What is the standard size blade for a push mower?
Mower blades can be 1 1/2″ to 4 1/4″ in width, and are available in thicknesses ranging from about 1/10″ to almost 1/3″. [Back to top] Number of Holes Lawn mower blades will have either one or three holes in them for where they attach to the machine.
Are all push mower blades the same?
Lawnmower blades are not universal, they are mower specific. A mower blade must be an exact fit and torqued to the manufacturer’s specification.
Can a lawn mower blade be too sharp?
In fact, an edge that is that sharp has the tendency to roll over, which can cause blades to get nicked and chipped. Additionally, lawn mower blades that are too sharp get duller, faster resulting in the need to sharpen more frequently and a shorter blade life.
Do all mower blades fit all mowers?
No, lawn mower blades are not universal, they are mower-specific. You can replace a certain manufacturer’s blades with another manufacturer’s blade, provided that they match up with your mower in length, thickness, width, hole numbers, hole shapes, and hole sizes.
What blades fit my mower?
The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.
How do I know what size mower blades I need?
In most cases, the replacement blades are labeled as the same size as the deck. If, for example, the mower has a 46-inch deck, then chances are good that the correct blades are labeled “46 inch tractor blade” or similar wording. Selecting the correct blades requires a little bit of digging.
How do I know which mower blade to buy?
How do I know what size lawn mower blade I need?
LENGTH: Length is measured diagonally from one tip of the blade to the opposite tip of the blade. It is important to measure the length correctly. Measuring from end to end will result in the wrong blade length. All length measurements must be made diagonally.
Are thicker mower blades better?
Blades that are too sharp become blunt faster than fairly dull ones. Thus, you should choose thicker blades over thinner ones to avoid frequent sharpening. They should be sharp enough to do a clean cut with great ease and not too dull to leave freshly cut grass looking unsightly.
Do brand new lawn mower blades need to be sharpened?
No, it’s not necessary to sharpen brand new lawn mower blades. You can simply remove your new blade from its packaging, remove the old blade carefully from your mower, and then attach the new one.
How do I know what mower blade I need?
How do I find out my lawn mower blade size?