How to redirect Hotspot login page MikroTik?

How to redirect Hotspot login page MikroTik?

The following steps will show how to enable HTTPS Redirect in MikroTik Hotspot Server.

1. From Winbox, go to IP > Hotspot.
2. From Hotspot window, click on Server Profiles tab and double click on your Server profile.
3. From Hotspot Server Profile window, click on Login tab.
4. From Login By panel, click on HTTPS checkbox.

How can I change my MikroTik login page?

The following steps will show how to upload the edited file in MikroTik Router.

1. Login to MikroTik Router again with Winbox software.
2. Click on Files menu item to open File List window.
3. Remove the old login page under hotspot directory.
4. Now drag and drop your edited file under hotspot directory.

What is MikroTik hotspot?

The MikroTik HotSpot gateway provides authentication for clients before access to public networks. A HotSpot only works reliably when the IPv4 protocol is used; the HotSpot relies on Firewall NAT rules which aren’t supported with IPv6.

What is MikroTik user manager?

Introduction. User manager (UM) is a management system that can be used in various setups. UM can be used for HotSpot, PPP, DHCP, Wireless and RouterOS users. User Manager is a RADIUS server application. The first UM test package was introduced in RouterOS version 4.

What is MikroTik router default password?

The default username is admin with no password. After you log in for the first time, please create a new user with a password in the “full” group, re-login and delete the default admin user.

What is mikrotik user manager?

How do I create a login page for WiFi?

How to Set Up a Guest WiFi Network

1. Enter your router’s IP address into the search bar of any browser.
2. Log into your router as admin.
3. Find the guest network settings.
4. Enable the guest WiFi access.
5. Set the guest WiFi network name.
6. Set the guest WiFi password.
7. Finally, save your new settings.

What is the default IP address for MikroTik router?

192.168.88.1/24
Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.

How do you use a Userman?

Step 5 – Configuring UserManager

1. Click on the “IP” menu.
2. Click on “Hotspot”
3. Select the “Server Profiles” tab.
4. Double click on “hsprof1”
5. Select the “RADIUS” tab.
6. Tick the “Use RADIUS” tickbox.
7. Click “OK”

What is the default username and password for mikrotik?

How do I access my mikrotik router from the browser?

Logging into the router To access the router enter address 192.168. 88.1 in your browser. Main RouterOS page will be shown as in the screen shot below. Click on WebFig from the list.