What is the difference between Loctite 270 and 271?
Loctite 270 : Threadlocking Adhesive – high strength. Permanent locking. Suitable for all metal threaded assemblies. Loctite 271 ：High strength, low viscosity, red, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.
What is the strongest thread locker?
LOCTITE® red threadlocker
LOCTITE® red threadlocker is the highest strength of threadlocker adhesive. This product cures fully in 24 hours and is available in both a liquid and as a semisolid anaerobic. The red high strength threadlocker products are so powerful they may require heat to be disassembled.
What is the difference between Loctite 271 and 272?
Loctite 271 can be used on fastenings up to 1inch in diameter and Loctite 272 is designed for larger fastenings, ranging between 1 and 1.5 inches. If you use the wrong threadlocker for your size fastenings, the adhesive will not form a tight seal and the threadlocker will not perform as it should.
How strong is Loctite 271?
Specific Gravity: 1.1. Thread-Locking Strength: High. Viscosity Measurement: 500cP.
Is Loctite 270 discontinued?
Beginning January 2010, Henkels Corporation, makers of Loctite products, have discontinued the Loctite 270 Product. They are replacing orders for Loctite 270 with Loctite 263, which is RED in color.
What color is Loctite 271?
red
LOCTITE® 271™ is a red, low viscosity, methacrylate-based threadlocking adhesive with high strength.
Is permatex as good as Loctite?
Thread Sealants Both brands are pretty much the same. For example, the Loctite 565 Thread Sealant and the Permatex 56521 Thread Sealant have the same specs. They both work on NPT thread up to 2 inches, handle temperatures from -65 to 300 degrees, and take on pressures up to 10,000 psi.
What is the weakest Loctite?
From the lowest side of the spectrum is the Loctite Purple. This strength is perfect for fasteners less than 6mm.
How long does it take for Loctite 271 to set?
10 minutes
Sets in just 10 minutes & is fully cured in 24 hours. LOCTITE 271 is ideal for as received fasteners up to 1″ (25 mm) in size.
How do you use Loctite red 271?
Force the material into the threads to thoroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a 360°bead of product on the female threads also. Assemble parts and tighten as required. Sets in approximately 10 minutes and fully cures in 24 hours.
How long does Loctite 271 take to set?
approximately 10 minutes
Assemble parts and tighten as required. Sets in approximately 10 minutes and fully cures in 24 hours. Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush.