What does 8E2 mean on Samsung washer?
Samsung Washer Error Codes
| Code | Meaning |
|---|---|
| nd, 5E, SE, 5C, SC, 1 5C | Draining Problem; Water Is Not Draining Properly from The Washer |
| OE, 0E, OC, 0C, 1 OC, 1 0C | Overflow – Too Much Water in The Washer |
| E2, bE2, 6E2, BE2*, 8E2* | Stuck Button Error |
What does AE6 mean on Samsung washer?
AE and AE6 represent communication errors between the sub and main PBAs or the main and inverter PBAs.
How do I fix the code on my Samsung washing machine?
Occasionally, the UR error code is caused by a fault with the electronic controller, which has mistakenly identified an unbalanced load error when there is none. Resetting the washer by disconnecting the power to the washer for 10 minutes should fix the issue.
How do I fix my Samsung Washer error code 3E?
How To Fix 3E Samsung Washer Error Code:
- Unplug The Washing Machine: Unplug the washer for 2-3 minutes.
- Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems.
- Check Wire Connections On Control Board:
- Check Hall Sensor:
Why Samsung washer will not drain?
It could be because the washer isn’t level or the drain tube is clogged or pinched. Adjust the legs of your washer, as needed, and check the drain tube for kinks or damage. Troubleshoot a Samsung washer not draining with these likely causes and straightforward solutions.
How do I fix error code AC6?
AC6 error is an error when the exchange of data between the control module and the information display board has an issue. Recommended Troubleshooting Tip: Switch off the washing machine and unplug the power cable from the power source and power it on again and start another washing cycle.
What are washing machine error codes?
Error Codes in my Whirlpool Front Load Washer
| Error Code | Error |
|---|---|
| rL or F34 | Items were detected in the washer during the Clean Washer cycle. |
| Sud or Sd | There are too many suds in the washing machine. |
| F5 E2 | The door is not locking properly. |
| F7 E1 | Indicates a motor speed sensing error, |
How do I fix error code E3?
Troubleshooting An E3 Error Code First, you should check the wiring of the fan motor to make sure everything is connected properly and not loose. It is possible that the fan motor or the control board will have to be replaced.
What does 3E mean on my washing machine?
Samsung Washing Machine Error Code 3E = Motor Drive Error or Hall Sensor Error. When your Samsung Washing Machine shows the error code 3e, the most common reason is because of a “wire harness or wiring connection is loose, not connected, or wiring is damaged”.