What is japanning on a plane?
Japanning gives you the texture of a thick coating that can not be duplicated by simply grabbing a can of Krylon and spraying it with several coats of spray paint. When the plane is done it looks fantastic. So much so that some people may never be able to tell that the tools has been re-japanned.
How do I remove japanning from a hand plane?
Get the can of paint stripper at one of the borgs that just says “STRIPPER” on it, let it soak on the bed for (whatever the can says) and then wipe it off with paper towels and rinse. The japanning just comes off completely. Wear gloves when you do it, the stripper will burn your skin.
How to remove japaning?
Soak the parts overnight in the lacquer thinner then scrape off the loose and softened japanning. When done with some care these methods will not harm the cast iron. After removing the old japanning the parts should be cleaned with turpentine, then wiped down with acetone just prior to application of japanning.
How is japanning done?
Black is common and japanning is often assumed to be synonymous with black japanning. The European technique uses varnishes that have a resin base, similar to shellac, applied in heat-dried layers which are then polished, to give a smooth glossy finish. It can also come in reds, greens and blues.
How do you do japanning?
Japanning involves a baking process, though cold formulas also existed and were commonly used and recommended for exterior finishes and coating metal. A modern cold recipe simply involves mixing a 50-50 ratio of asphaltum to a good spar varnish and allowing it to dissolve and mix thoroughly.
Why is it called japanning?
Oriental lacquer objects were first imported into Europe in the late sixteenth century. Imitations of lacquer and other decorative surfaces by European craftsmen using their own materials and techniques were known as ‘japanning’.
When was japanning invented?
Japanning is a type of finish that originated as a European imitation of East Asian lacquerwork. It was first used on furniture, but was later much used on small items in metal. The word originated in the 17th century.
How do you make black Japanese steel?
Japan black consists mostly of an asphaltic base dissolved in naphtha or turpentine, sometimes with other varnish ingredients, such as linseed oil. It is applied directly to metal parts, and then baked at about 200°C (400°F) for up to an hour.
What is the rarest Stanley plane?
STANLEY No. 604 1/2C BEDROCK Smooth Plane Type 11 circa 1942-43 NEAR MINT! – 88276.
What is the process of japanning?
Japanning is a process by which Europeans treated and decorated antique furniture with lacquer and resin, in order to imitate various styles found across the Asian continent.