Can you walk on stratco Cooldek?
When walking on Cooldek roofing, it is recommended you walk over the support beam to avoid damage. Wear flat, rubber soled shoes and walk flat footed in the sheet pans for Classic, and with your weight spread over as many crests as possible for CGI.
How do you attach a porch roof to a house?
To connect a porch roof to your house, begin by:
- Building a support column to give your porch roof stability.
- Attach the sill plate to the house.
- Position the rafters on top of the sill plate.
- Frame your porch roof.
- Cover the rafters with sheets of plywood.
- Choose a roofing material.
What do I need to know about STRATCO Outback installation guide?
OUTBACK®SKILLION INSTALLATION GUIDE BEFORE YOU START Carefully read these instructions and refer to them constantly during each stage of construction. If you do not have all the necessary tools or information contact Stratco for advice. Before starting, lay out all components and check them against the delivery docket.
How do you attach reinforced Outback columns to concrete?
SHS REINFORCED OUTBACK COLUMN Reinforced Outback Columns are to be fixed to the concrete slab with four M12x75mm masonry anchors or screw bolts (Figure 10.3). Note: Anchors to be installed in accordance with manufacturer’s specifications with appropriate concrete edge distance as per manufacturer’s requirements.
How do you install Rooflite on an outback?
OUTBACK ROOFLITETMINSTALLATION An Outback Rooflite can be used to add natural light. The polycarbonate Rooflite overlaps the deck by snapping or sliding over the already installed sheets that have been spaced 250mm apart.
How do you attach a SHS post to an outback?
Screw the corner connector or inline connector to the top of the SHS post with two 12×20 hex head self drilling screws on either side of the column (Figure 4.2). Stand the post in position. Screw the connector to the outside face of the Outback beam with 12×20 self drilling hex head screws (Figure 4.2).